Call (888)-671-2883
FREE SHIPPING
 on most items
Text message to Live Chat! (201) 898 - 2676

Toshiba VT130G9U2110 10HP 230V 3Phase Nema-1 Frame 5A G9 Adjustable Speed Drive

BRAND: Toshiba | MODEL: VT130G9U2110 | CONDITION: NEW | SKU: 2931398
Toshiba VT130G9U2110 10HP 230V 3Phase Nema-1 Frame 5A G9 Adjustable Speed Drive

Image for Illustration purposes only,
Actual product may vary
$1,363.83
FREE SHIPPING
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Typically ships in 1 day
Weight: 21.00 lbs UOM: EA
100% SAFE SHOPPING
PAYMENT METHOD
 
 

Additional Description

Description

The G9 adjustable speed drive is the most advanced severe duty drive ever offered by Toshiba. It is a blend of a robust power platform and a state-of-the-art control scheme. With its 115% continuous overload rating and its dual 32-bit processor controls, the G9 provides the ability to operate the toughest of applications while still maintaining a high level of control.


G9 Specifications
Model Range
0.75 to 100HP
1 to 350 HP
Voltage Rating
200 to 240 V
380 to 480 V
Input Voltage Tolerance
±10%
Voltage Regulation Main Circuit Voltage Feedback Control (Automatic Regulation, 'Fixed' and 'Control Off' Selections)
PWM Carrier Frequency Adjustable 0.5 to 15 kHz (ASD Specific, Consult Factory)
Control System Sine Wave PWM System - Flux field current vector control
V/f Pattern Open Loop Vector, Closed Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost, 5-Point V/f Custom Curve Setting
Overload Current Rating 115% Continuous and 150% for two Minutes (< or =100 HP/480V), 110% Continuous and 150% for one Minute (>100 HP/480V)
Frequency Setting Rotary Encoder Integrated into EOI, 0 to 10 V, ±10 V, 4 to 20 mA, Binary Input, Motorized Potentiometer Input
Frequency Precision Analog Input 0.2% of the Maximum Output Frequency, Digital Input 0.01% of the Maximum Output Frequency
Output Frequency Range 0 to 299 Hz
Speed Regulation Closed Loop (Up to 0.01%, 1000:1 Speed Range), Open Loop (Up to 0.1%, 60:1 Speed Range)
Discrete Input Terminals Eight Discrete Input Terminals Programmable to 67 Functions; Number of Terminals may be Increased Using Optional Hardware
Analog Inputs One 4-20 mA or 0-10Vdc isolated input, one 0-10Vdc input, and one +/- 10Vdc input
Discrete Output Contacts Three Output Contacts Programmable to 127 Functions
Analog Outputs One Programmable 4 to 20 mA or 0 to 10 V and One 4 to 20 mA Output
Control Board Communication Ports 2-Wire/4-Wire RS485
Power Terminals Input (L1, L2, L3); Output (T1, T2, T3); DCL(PO,PA); Dynamic Breaking Resistor (PA,PB); DC BUS (PA, PC)
Set Point Control (PID) Proportional Gain, Integral Gain, Feedback Settings Upper/Lower Deviation Limits, Feedback Source Delay Filter, Feedback Settings Differential Gain
Retry Can be setup to clear resetable faults upon trip automatically.
Restart ASD will catch a coasting motor smoothly.
Ambient Operating Temperature: -10 to +40°C; 14 to 104°F Humidity: 95% Non-Condensing
Installation NEMA 1 Enclosure Type
Electronic Operation Interface (EOI)
LCD EOI (Liquid Crystal Display/Electronic Operator Interface) Full English Back-Lit Display
LED EOI Light Emitting Diode; Seven Segment Display
LED Indicators Run (Red)/Stop (Green), Local/Remote (Green), DC Bus Charge Indicator (Red)
Keys Local/Remote, ESC, Run, Mode, Stop/Reset
Rotary Encoder Encoder with Integrated Enter Key for Frequency and Parameter Adjustments
Monitoring Main Display shows two monitored Items selectable from: Output Current, DC Voltage, Output Voltage, Run Time, Comp. Frequency, PID Feedback, Motor Overload, Motor Load, ASD Load, Input Power, Output Power, RR Input, VI/II input, RX Input, RX2 Input, AM Output, and FM Output.
Selectable Display units Completely Configurable along with Scaling Factor Multiple; Current Display Selectable Between Amps (A) or percentage of FLA (%); Voltage Display Selectable Between Volts or %.