Categories

Subtotal

View cart
Add products to your shopping cart
#2931419

Image for Illustration purposes only. Actual product may vary

  • BRAND:
  • SKU: 2931419
  • CONDITION: NEW
  • MODEL: VT130G9U4500

Toshiba VT130G9U4500 50HP 460V 3Phase Nema-1 Frame 7A G9 Adjustable Speed Drive

$5,276.13 Each

NEW

  • Typically ships in: 1 day
  • Weight: 124.0 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

The G9 adjustable speed drive is the most advanced severe duty drive ever offered by Toshiba. It is a blend of a robust power platform and a state-of-the-art control scheme. With its 115% continuous overload rating and its dual 32-bit processor controls, the G9 provides the ability to operate the toughest of applications while still maintaining a high level of control.


G9 Specifications
Model Range
0.75 to 100HP
1 to 350 HP
Voltage Rating
200 to 240 V
380 to 480 V
Input Voltage Tolerance
±10%
Voltage Regulation Main Circuit Voltage Feedback Control (Automatic Regulation, 'Fixed' and 'Control Off' Selections)
PWM Carrier Frequency Adjustable 0.5 to 15 kHz (ASD Specific, Consult Factory)
Control System Sine Wave PWM System - Flux field current vector control
V/f Pattern Open Loop Vector, Closed Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost, 5-Point V/f Custom Curve Setting
Overload Current Rating 115% Continuous and 150% for two Minutes (< or =100 HP/480V), 110% Continuous and 150% for one Minute (>100 HP/480V)
Frequency Setting Rotary Encoder Integrated into EOI, 0 to 10 V, ±10 V, 4 to 20 mA, Binary Input, Motorized Potentiometer Input
Frequency Precision Analog Input 0.2% of the Maximum Output Frequency, Digital Input 0.01% of the Maximum Output Frequency
Output Frequency Range 0 to 299 Hz
Speed Regulation Closed Loop (Up to 0.01%, 1000:1 Speed Range), Open Loop (Up to 0.1%, 60:1 Speed Range)
Discrete Input Terminals Eight Discrete Input Terminals Programmable to 67 Functions; Number of Terminals may be Increased Using Optional Hardware
Analog Inputs One 4-20 mA or 0-10Vdc isolated input, one 0-10Vdc input, and one +/- 10Vdc input
Discrete Output Contacts Three Output Contacts Programmable to 127 Functions
Analog Outputs One Programmable 4 to 20 mA or 0 to 10 V and One 4 to 20 mA Output
Control Board Communication Ports 2-Wire/4-Wire RS485
Power Terminals Input (L1, L2, L3); Output (T1, T2, T3); DCL(PO,PA); Dynamic Breaking Resistor (PA,PB); DC BUS (PA, PC)
Set Point Control (PID) Proportional Gain, Integral Gain, Feedback Settings Upper/Lower Deviation Limits, Feedback Source Delay Filter, Feedback Settings Differential Gain
Retry Can be setup to clear resetable faults upon trip automatically.
Restart ASD will catch a coasting motor smoothly.
Ambient Operating Temperature: -10 to +40°C; 14 to 104°F Humidity: 95% Non-Condensing
Installation NEMA 1 Enclosure Type
Electronic Operation Interface (EOI)
LCD EOI (Liquid Crystal Display/Electronic Operator Interface) Full English Back-Lit Display
LED EOI Light Emitting Diode; Seven Segment Display
LED Indicators Run (Red)/Stop (Green), Local/Remote (Green), DC Bus Charge Indicator (Red)
Keys Local/Remote, ESC, Run, Mode, Stop/Reset
Rotary Encoder Encoder with Integrated Enter Key for Frequency and Parameter Adjustments
Monitoring Main Display shows two monitored Items selectable from: Output Current, DC Voltage, Output Voltage, Run Time, Comp. Frequency, PID Feedback, Motor Overload, Motor Load, ASD Load, Input Power, Output Power, RR Input, VI/II input, RX Input, RX2 Input, AM Output, and FM Output.
Selectable Display units Completely Configurable along with Scaling Factor Multiple; Current Display Selectable Between Amps (A) or percentage of FLA (%); Voltage Display Selectable Between Volts or %.

Return policy

Return policy: No charge for a replacement PO if the amount is of equal or greater value. IDC Member is responsible for freight to ship return to Houston, TX. Contact IDC Member Services for return requests. 

Product's availability

State of California Proposition 65 Product Warning