View cart
Add products to your shopping cart

Image for Illustration purposes only. Actual product may vary

C48TD012 C48T DC (2PRRLY)

$210.00 Each


  • Typically ships in: 1 day
  • Weight: 1.0 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description


The C48TD012 has dual presets. The C48T features a 7 segment, 2 line by 6 digit reflective LCD display. The main display line shows the timer value. The smaller secondary display line can be used to view the preset values or output time values. This unit has relay outputs. All relay output boards are field replaceable.

The C48 timer can be configured for 42 different operating modes to meet most timing application requirements. Twelve timing ranges are available from thousandths of a second to hours and minutes. Decimal Points are used to separate the time units (hours, minutes, seconds). Timing can be cumulative or can reset and start upon each power cycle. 'On Delay' or 'Off Delay', 'Single Shot', 'Repetitive auto cycling' modes are all supported.

The Timer can also be configured to Continue or Stop timing upon reaching Preset. The display can be programmed to stop at the preset value (Reset to Zero mode) or zero (Reset to Preset mode), or automatically reset to zero or preset and hold. Once stopped, the timer can be restarted by manually resetting it, or it can be programmed to restart when power is reapplied.

The C48 Timer has a Run/Stop Input, 3 programmable User Inputs, and a programmable front panel function key. The Run/Stop and User Inputs can be configured as sinking (active low) or sourcing (active high) inputs via a single plug jumper. The user inputs and the front panel function key can be configured to provide a variety of functions.

Four front panel push-buttons are used for programming the operating modes and data values, changing the viewed display, and performing user programmable functions, e.g. reset, etc. The C48T can be configured for one of two numeric data entry methods, digit entry or automatic scrolling. The digit entry method allows for the selection and incrementing of digits individually. The automatic scrolling method allows for the progressive change of one through all digit positions by pressing and holding the 'up' or 'down' button.

The unit is constructed of a lightweight, high impact plastic case with a textured front panel and a clear display window. The front panel meets NEMA 4X/IP65 specifications when properly installed. Multiple units can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the C48 Timers extremely reliable in industrial environments.

  • Dual Preset
  • 50 mm x 50 mm
  • 2 Line, 6 Character Reflective LCD
  • 12 Timer Range Modes
  • Dual Relay Outputs
  • 11 to 36 VDC (24 VDC nominal) Input Power
  • NEMA 4X/IP65
ENC11000 ENC11 NEMA 4/IP65 1/16 DIN Enclosure
ENC11A00 ENC11A NEMA 4X/IP65 Enclosure for one 1/16 DIN Meter
ENC11B00 ENC11B NEMA 4X/IP65 Enclosure for two 1/16 DIN Meter
ENC30000 ENC3 Legend/Libra/C48/P48/P16/T16/T48/PXV Enclosure NEMA 1
TCM10000 TCM1 Triac Converter Module, 115 VAC
VCM10000 VCM1 Voltage Converter Module, 450 V AC/DC
VCM20000 VCM2 Voltage Converter Module, 50270 V AC/DC
BMK30000 BMK3 Base Mount Kit for Legend Libra, T16, P16, T48, P48, C48 and PXU
PMK3C000 PMK3C C48, T48, P16, T16 and PXU Mounting Panel
PMK60000 PMK6 Panel Mount Adapter Kit (1/8 DIN to 1/16 DIN)
PMK70000 PMK7 Panel Mount Adapter Kit (1/4 DIN to 1/16 DIN)
PMKCC100 PMKCC1 50 x 50 mm Panel Mount 3 Piece Kit for C48, T48 and PXU
PMKCC200 PMKCC2 72 x 72 mm Panel Mount 3 Piece Kit for C48, T48 and PXU
PMKCC300 PMKCC3 60 x 75 mm Panel Mount 2 Piece Kit for C48, T48 and PXU
PNL3F000 PNL3F Panel for 1/16 DIN Units
PNL3G000 PNL3G Panel for 1/16 DIN Units with Keylock
RBC48001 C48 Replacement Board 1 Preset NPNOC
RBC48002 C48 Replacement Board 1 Preset PNPOC
RBC48003 C48 Replacement Board 2 Preset Relay
RBC48004 C48 Replacement Board 3 Preset Relay NPNOC
RBC48005 C48 Replacement Board 3 Preset Relay PNPOC
SNUB0000 SNUB RC Snubber Inductive Load Supressor

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning