View cart
Add products to your shopping cart

Image for Illustration purposes only. Actual product may vary


$212.00 Each


  • Typically ships in: 1 day
  • Weight: 2.0 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description


The PAXTM (PAX Timer) offers many features and performance capabilities to suit a wide range of industrial applications. It can function as an Elapsed Timer or Preset Timer. The Plug-in option cards allow the opportunity to configure the meter for the present application, while providing easy upgrades for future needs.

Both units can function as an Elapsed Time Indicator. By using two separate signal inputs and 23 selectable timer ranges, the meters can be programmed to meet most any timing application. With the addition of a Plug-in Setpoint card, they can easily become a dual or quad output preset timer.

The meters accept inputs from a variety of sources including switch contacts and outputs from CMOS or TTL circuits. The input can be configured to trigger on the edge or level of the incoming pulse. Internal jumpers are available to allow the selection for sinking inputs (active low) or sourcing inputs (active high).

The front panel keys and three user inputs are programmable to perform various meter functions. One of the functions includes exchanging parameter lists, allowing for two separate listings of setpoint values, timer start/stop values, counter start/stop values and RTC daily on and off values.

The meters can have up to four setpoint outputs, determined by the optional plug-in cards. The setpoint plug-in cards provide dual FORM-C relays (5A), quad FORM-A relays (3A) or either quad sinking or quad sourcing open collector logic outputs. The outputs can be assigned to the timer, counter, RTC date, and RTC time. The outputs can also be independently configured to suit a variety of control and alarm requirements.

Plug-in cards can also provide serial communications. These include RS232, RS485, Modbus, DeviceNet, and Profibus-DP. Display values, setpoint alarm values and setpoint states can be controlled through serial communications. With the RS232 or RS485 communication card installed, it is possible to configure the meter using a Windows based program. The meter configuration data can be saved to a file for later recall.

Once the meters have been initially configured, the parameter list may be locked out from further modification entirely, or the setpoint, timer start/stop values, counter start/stop values, RTC time SET, and Display Intensity can be made accessible. This lockout is possible through a security code or user input.

The meters have been specifically designed for harsh industrial environments. With a NEMA 4X/IP65 sealed bezel and extensive testing to meet CE requirements, the meter provides a tough yet reliable application solution.

  • 1/8 DIN (50 mm x 97 mm)
  • 6 Digit, 0.56" (14.2 mm) LED Display
  • Red Sunlight Readable Display
  • Elapsed Timer w/Preset Capability
  • Counter w/Preset Capability
  • Cycle Counting Capability
  • Programmable Function Keys/User inputs
  • Four Setpoint Alarm Outputs
  • Communications and Bus Capabilities
  • PC Software Available for Meter Configuration
  • 11 to 36 VDC (24 VDC nominal) Input Power
  • NEMA 4X/IP65
ENC5A000 ENC5A Steel NEMA 4/IP65 Enclosure for PAX
ENC5B000 ENC5B NEMA 4X/IP65 Plastic Enclosure for 1 PAX meter
ENC5C000 ENC5C NEMA 4X/IP65 Plastic Enclosure for 2 PAX meters
PAXLBK10 PAXLBLE Units Label Kit Accessory (Not required for DP5T or PAXT)
PAXLBK30 PAXLBK Label Kit for PAX Lite Analog Meters
TCM10000 TCM1 Triac Converter Module, 115 VAC
VCM10000 VCM1 Voltage Converter Module, 450 V AC/DC
VCM20000 VCM2 Voltage Converter Module, 50270 V AC/DC
BMK40000 BMK4 Base Mount Kit for Apollo, Gemini, PAX, TCU, PCU, TSC, PSC and PXU
BMK90000 BMK9 DIN Rail PAX Base Mount Kit
PMK4B000 PMK4B Apollo, IM, PAX, TCU, PCU, TSC, PSC and PXU Mounting Panel
PMK50000 PMK5 Panel Mount Adapter Kit (1/4 DIN to 1/8 DIN)
PMK80000 PMK8 Panel Mount Adapter Kit (Gemini to PAX)
PAXCDC10 PAXCDC RS485 Serial Comms Output Card with Terminal Block
PAXCDC1C PAXCDC Extended RS485 Serial Comms Output Card with Dual RJ11 Connector
PAXCDC20 PAXCDC RS232 Serial Comms Output Card with Terminal Block
PAXCDC2C PAXCDC Extended RS232 Serial Comms Output Card with 9 Pin D Connector
PAXCDC30 PAXCDC DeviceNet Option Card
PAXCDC40 PAXCDC Modbus Communications Card
PAXCDC4C PAXCDC Extended Modbus Communications Card with Dual RJ11 Connector
PAXCDC50 PAXCDC ProfibusDP Communications Card
PAXCDL10 PAXCDL Analog Output Card
PAXCDS10 PAXCDS Dual Setpoint Relay Output Card
PAXCDS20 PAXCDS Quad Setpoint Relay Output Card
PAXCDS30 PAXCDS Quad Setpoint Sinking Open Collector Output Card
PAXCDS40 PAXCDS Quad Setpoint Sourcing Open Collector Output Card
PAXRTC00 PAXRTC PAXRealTime Clock Card (Replacement Only)
PAXUSB00 PAXUSB PAX USB Programming Card
SNUB0000 SNUB RC Snubber Inductive Load Supressor

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning