Image for Illustration purposes only. Actual product may vary
The C48TD005 has dual presets. The C48T features a 7 segment, 2 line by 6 digit reflective LCD display. The main display line shows the timer value. The smaller secondary display line can be used to view the preset values or output time values. This unit has solid-state outputs which are NPN current sinking, open-collector transistors.
The C48 timer can be configured for 42 different operating modes to meet most timing application requirements. Twelve timing ranges are available from thousandths of a second to hours and minutes. Decimal Points are used to separate the time units (hours, minutes, seconds). Timing can be cumulative or can reset and start upon each power cycle. 'On Delay' or 'Off Delay', 'Single Shot', 'Repetitive auto cycling' modes are all supported.
The Timer can also be configured to Continue or Stop timing upon reaching Preset. The display can be programmed to stop at the preset value (Reset to Zero mode) or zero (Reset to Preset mode), or automatically reset to zero or preset and hold. Once stopped, the timer can be restarted by manually resetting it, or it can be programmed to restart when power is reapplied.
The C48 Timer has a Run/Stop Input, 3 programmable User Inputs, and a programmable front panel function key. The Run/Stop and User Inputs can be configured as sinking (active low) or sourcing (active high) inputs via a single plug jumper. The user inputs and the front panel function key can be configured to provide a variety of functions.
Four front panel push-buttons are used for programming the operating modes and data values, changing the viewed display, and performing user programmable functions, e.g. reset, etc. The C48T can be configured for one of two numeric data entry methods, digit entry or automatic scrolling. The digit entry method allows for the selection and incrementing of digits individually. The automatic scrolling method allows for the progressive change of one through all digit positions by pressing and holding the 'up' or 'down' button.
The RS-485 serial communication interface provides two-way communication between a C48 and other compatible equipment such as a printer, PLC, HMI, or a host computer. In multipoint applications (up to thirty-two), the address number of each C48 on the line can be programmed from 0 to 99. Data from the C48 can be interrogated or changed, and alarm output(s) may be reset by sending the proper command code via serial communications. PC software, SFC48, allows for easy configuration of controller parameters. These settings can be saved to disk for later use or used for multi-controller down loading. On-line help is provided within the software.
The unit is constructed of a lightweight, high impact plastic case with a textured front panel and a clear display window. The front panel meets NEMA 4X/IP65 specifications when properly installed. Multiple units can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the C48 Timers extremely reliable in industrial environments.
- Dual Preset
- 50 mm x 50 mm
- 2 Line, 6 Character Reflective LCD
- 12 Timer Range Modes
- Dual NPN OC Outputs
- RS-485 Communications
- 85 to 250 VAC Input Power
- NEMA 4X/IP65
|ENC11000||ENC11 NEMA 4/IP65 1/16 DIN Enclosure|
|ENC11A00||ENC11A NEMA 4X/IP65 Enclosure for one 1/16 DIN Meter|
|ENC11B00||ENC11B NEMA 4X/IP65 Enclosure for two 1/16 DIN Meter|
|ENC30000||ENC3 Legend/Libra/C48/P48/P16/T16/T48/PXV Enclosure NEMA 1|
|TCM10000||TCM1 Triac Converter Module, 115 VAC|
|VCM10000||VCM1 Voltage Converter Module, 450 V AC/DC|
|VCM20000||VCM2 Voltage Converter Module, 50270 V AC/DC|
|BMK30000||BMK3 Base Mount Kit for Legend Libra, T16, P16, T48, P48, C48 and PXU|
|PMK3C000||PMK3C C48, T48, P16, T16 and PXU Mounting Panel|
|PMK60000||PMK6 Panel Mount Adapter Kit (1/8 DIN to 1/16 DIN)|
|PMK70000||PMK7 Panel Mount Adapter Kit (1/4 DIN to 1/16 DIN)|
|PMKCC100||PMKCC1 50 x 50 mm Panel Mount 3 Piece Kit for C48, T48 and PXU|
|PMKCC200||PMKCC2 72 x 72 mm Panel Mount 3 Piece Kit for C48, T48 and PXU|
|PMKCC300||PMKCC3 60 x 75 mm Panel Mount 2 Piece Kit for C48, T48 and PXU|
|PNL3F000||PNL3F Panel for 1/16 DIN Units|
|PNL3G000||PNL3G Panel for 1/16 DIN Units with Keylock|
|RBC48001||C48 Replacement Board 1 Preset NPNOC|
|RBC48002||C48 Replacement Board 1 Preset PNPOC|
|RBC48003||C48 Replacement Board 2 Preset Relay|
|RBC48004||C48 Replacement Board 3 Preset Relay NPNOC|
|RBC48005||C48 Replacement Board 3 Preset Relay PNPOC|
|SNUB0000||SNUB RC Snubber Inductive Load Supressor|