Call (888)-671-2883
FREE SHIPPING
 on most items
Text message to Live Chat! (201) 898 - 2676

VT-IPM2M-213-D 12DI8DO8AI2AOEth1232

BRAND: Red Lion Controls | MODEL: VT-IPM2M-213-D | CONDITION: NEW | SKU: 1358074
VT-IPM2M-213-D 12DI8DO8AI2AOEth1232

Image for Illustration purposes only,
Actual product may vary
$1,071.00
FREE SHIPPING
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Typically ships in 1 day
Weight: 0.00 lbs UOM: EA
100% SAFE SHOPPING
PAYMENT METHOD
 
 

Additional Description

Description

Specifications: 

  • Industrial PowerPC (32 bit data bus)
  • Operating system embedded open-source Linux
  • Dynamic memory (RAM) 32 Mb for program execution, dynamic variables, dynamic file system, etc.
  • Program memory (Flash) 32 Mb for Linux OS, program storage and file system
  • Retained memory (RAM) 512K (battery-backed) for datalogging and retained variables
  • Real-time clock battery-backed for time stamping and other operations
  • I/O Expansion RS-485 or Ethernet
  • Datalogging support
  • IEC 61131 programming, ISaGRAF for ladder logic, SFC, flow charting and more (6 languages supported)
  • High Level C programming

Ethernet Port 

  • 10/100BaseTx (auto-detecting)
  • RJ45 connection (auto-crossover)
  • Protocols TCP / IP, ARP, UDP, ICMP, DHCP, Modbus / TCP, Sixnet, optionally PPP, DNP3, IEC60870-5-101/104 and more

Serial Port 

  • Up to 115,200 baud
  • RS-485 Port A screws (485+, 485-, GND) (2-wire half-duplex)
  • RS-232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND)
  • Protocols Master and slave modes; Sixnet and Modbus RTU / ASCII;  optional: Slave; DNP3, IEC60870-5-101/104. Others available as Linux applications     

Discrete Inputs

  • 12 channels sourcing or sinking (jumper/software selectable)
  • Guaranteed ON voltage 9 VDC
  • Maximum voltage 30 VDC
  • Guaranteed OFF voltage 5.0 VDC and 1.5 mA DC
  • Input resistance and current 10K Ohms and 3 mA @ 24 VDC
  • Filtered ON/OFF delay 25 mS (20 Hz max. counting) for contact bounce filtering
  • Fast ON/OFF delay 4 mS (100 Hz max. counting)
  • Count rate (see above) (10 KHz on channel 1 only)
  • Counter modes pulse, rate and run time
  • Poll time (all channels) 5 mS to 20 mS configuration dependent

Discrete Outputs

  • 4 channels – sourcing 10-30 VDC
  • Min. and max. output load 1 mA to 1 Amp sourcing per channel
  • Max. OFF state leakage 0.05 mA
  • Inrush current 5 Amps (100 mS surge)
  • Typical ON characteristics 0.3 Ohms resistance and 0.3 VDC voltage drop @ 1A
  • Poll time (all channels) 5 mS to 20 mS configuration dependent

Analog Inputs

  • 8 channels – current or voltage selectable
  • Full scale range 4-20 mA or 0-5 VDC (jumper selectable)
  • A/D and input resolution 16 bits (0.003%); 2 uA (current range) or 0.5 mV (voltage range)
  • Full scale accuracy +/-0.1% (@20°C) (factory calibration)
  • Span and offset temp. coeff. +/-50 ppm per °C
  • Input impedance 100 Ohm (current range), 80 K Ohm voltage
  • Current protection Self-resetting fuses (for 4-20 mA range)
  • DMRR 66 dB at 50/60 Hz (differential mode rejection)
  • CMRR (common mode rejection) Not applicable since analog inputs are single ended.
  • Fastest update time 50 mS (both channels) – configurable for longer integration times for better noise filtering

Analog Outputs

  • 2 channels (4-20 mA)
  • D/A resolution 16 bits (less than 1μA)
  • Full scale accuracy (@20°C) +/- 0.02%
  • Span and offset temp. coef. +/- 50 ppm per °C typical
  • Max. output settling time 5 mS (to .05%)
  • Load resistance range (@ +24 VDC supply) 0-750 Ohms
  • Short circuit protection current limiting

Environmental

  • DIN-rail or panel-mount
  • Input power 10-30 VDC
  • Input current 100 mA @ 24 VDC (typical)
  • Temperature -40 to 70°C (-40 to 85°C storage)
  • Humidity 5% to 95% RH (non-condensing)
  • Flammability UL 94V-0 materials
  • Electrical safety UL 508, CSA C22.2/14; EN610101; (IEC1010)
  • EMI emissions FCC part 15, ICES-003, Class A; EN55022; EN61326-1
  • EMC immunity EN61326-1 (EN61000-4-2,3,4,6)
  • Surge withstand IEEE-472 (ANSI C37.90)
  • Vibration IEC68-2-6
  • Hazardous locations (Class 1, Div 2, Groups A,B,C,D) UL 1604, CSA C22.2/213, Cenelec EN50021 Zone 2
  • Tested to Marine/offshore standards