Categories

Subtotal

View cart
Add products to your shopping cart
#286790

Image for Illustration purposes only. Actual product may vary

RRMDC000 RETRO. DC PHOTO W/2M CBL

$127.00 Each

NEW

  • Typically ships in: 1 day
  • Weight: 1.0 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Description

The Model RRMDC is a miniature, DC powered, retroreflective photo-electric sensor with maximum detection range of 6.5 feet [1.98 M] (with 3' dia. reflector Model RT2). The “visible” LED light beam allows for easy alignment and is modulated, providing immunity to ambient light. The small beam size makes it a good choice for detecting relatively small objects. In operation, the visible LED light beam is directed at a photo transistor, amplified and demodulated. An object which then breaks this beam will trigger the output.

The sensor provides application flexibility in counting, positioning and object detection. The unit is interchangeable with conventional 12 mm threaded barrel-type photo-electrics and inductive proximity sensors. The small size, in addition to various mounting options, greatly increases alignment ease and application possibilities.

The unit can be powered by supplies ranging from +10 to +30 VDC and are reverse polarity protected. The complementary NPN open collector (Current Sinking) outputs are protected from continuous overload and inductive load transients and are rated to 150 mA, with low saturation voltage and less than 10 µA off-state leakage current. In addition, no false outputs are generated at power-up. The sensor has a 6 foot (1.83 M) long 4 conductor PVC jacketed cable which provides supply input and transistor output.

The miniature sensor offers a digital gain adjustment that uses a single sealed push button to streamline installation and setup. The user simply holds the button in to achieve maximum sensitivity, and then can click the button for seven decremental settings to fine tune for your application. They also feature smart new status indicators. Green and amber LED’s display operating status from three directions, indicate “power on” and “light sensed” and flash to signal “maximum gain,” “gain reduced one increment” and “minimum gain” conditions. You can tell operating status of your sensors at a glance.

Specifications
  • Retroreflective Photo Electric Sensor
  • 2 Meter¬†Cable
  • Modulated LED Light Beam
  • 10 to 30 VDC Power
  • NPN & PNP Outputs
  • Various Mounting Brackets and Reflective Targets
  • NEMA 1, 2, 3, 3S, 4, 4x, 12 & 13
Accessories
CCMPE000 CABLE Pico QD Connector/Cable 2m (Mini Photoelectric sensors)
RT100000 RetroReflective Target 1.5 inch
RT200000 RetroReflective Target 3 inch

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning