We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 126198 F4B-SCM-307 four-bolt flange bearing with 3-7/16" bore, set screw locking, medium duty, 218 series ball bearing, cast iron housing, non-expansion (fixed) design, DualGuard seals with flingers, 1000 RPM max speed. 3-7/16" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-SCM-307
Contact supplier for technical support on: +1-864-284-5700
$748.27 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
218 Series
Bearing type
Ball, ball
Bolt Diameter
0.7500 in
Bolt to bolt max
6.7500 in, 171.45 mm
Bolt to bolt min
6.7500 in, 171.45 mm
Bore
3 7/16 in
Bore length
2.5600 in, 65.024 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
2 4/9 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
2000 RPM
Max Speed
1000 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
3.4375 in
Standoff housing
No
Static load capacity
16641 lbf, 74022.856 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange (F4B) with square mounting pattern
- Bore Diameter: 3-7/16 inch (87.312mm) shaft diameter
- Locking Method: 65-degree set screw for maximum holding power
- Duty Rating: Medium duty (SCM) for heavier loads than normal duty
- Bearing Series: 218 series wide inner ring ball bearing
- Housing Material: Cast iron construction for durability
- Mounting: Non-expansion (fixed) design for shaft positioning
- Sealing: DualGuard single lip seals with rubberized flingers
- Applications: Heavy-duty surface mount applications requiring four-bolt security
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#784308
Brand
Dodge
Model
224484
#123613
Brand
Dodge
Model
F4B-SCM-300
#791286
Brand
Dodge
Model
F2B-SCEZ-103-SHSS
#128943
Brand
Dodge
Model
070368
#128779
Brand
Dodge
Model
F2B-SC-55M
| Brand | INA Bearing |
| Model | RNA4910 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/