We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 057752 TB-SC-104S-NL tapped-base pillow block bearing with 1-1/4" bore, set screw locking, cast iron housing, standard duty, no-lube sealed for life, non-expansion (fixed), DualGuard seals, 206 series. 1-1/4" bore Tap Based Ball Bearing with Set Screw locking used in General Purpose applications
MODEL TB-SC-104S-NL
Contact supplier for technical support on: +1-864-284-5700
$107.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
206 series
Base to center height
1.6900 in, 42.926 mm
Bearing type
Ball, ball
Bolt Diameter
0.4375 in
Bolt to bolt max
3.0000 in, 76.2 mm
Bolt to bolt min
3.0000 in, 76.2 mm
Bore
1 1/4 in
Bore length
1.5200 in, 38.608 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
No
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Tapped-base pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
4500 rpm
Relubrication
No
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Seal type
Single-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
2538 lbf, 11289.586 N
Suitable for high temperature
No
Suitable for washdown
No
Type
Tap based
- Housing Type: Tapped-base pillow block with threaded mounting holes
- Bore Diameter: 1-1/4" (31.75mm)
- Locking Mechanism: 65-degree set screw locking
- Housing Material: Cast iron
- Duty Rating: Standard duty for general industrial applications
- Lubrication: No-Lube sealed for life, no relubrication required
- Bearing Series: 206 series
- Seal Protection: DualGuard seals with flingers
- Expansion Type: Non-expansion (fixed) for shaft positioning
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125204
Brand
Dodge
Model
TB-SC-104S-NL
#123363
Brand
Dodge
Model
P2B-SC-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
#2272521
Brand
Browning
Model
767612
#5079811
Brand
Timken
Model
STB1 1/4S
| Brand | Magnetics |
| Model | MCL660X2 |
| Brand | Timken Belts |
| Model | RCX162-2 |
| Brand | U.S.Tsubaki |
| Model | 25B28SS |
| Brand | Precision Twist Drill |
| Model | QC41GN12 |
| Brand | Crown |
| Model | SP 0310PE |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/