We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 123634 F4B-VSC-104S four-bolt flange bearing with 1-1/4" bore, 65 degree set screw locking, intermediate duty rating, cast iron housing, 206 series ring, DualGuard seal system, non-expansion fixed mount. 1-1/4" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-VSC-104S
Contact supplier for technical support on: +1-864-284-5700
$65.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
206 series
Bearing type
Ball, ball
Bolt Diameter
0.4375 in
Bolt to bolt max
3.2500 in, 82.55 mm
Bolt to bolt min
3.2500 in, 82.55 mm
Bore
1 1/4 in
Bore length
1.5200 in, 38.608 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Polymer
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
1 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
6500 rpm
Max Speed
4500 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
2538 lbf, 11289.586 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange bearing for surface mounting
- Bore Size: 1-1/4" diameter (31.75mm)
- Locking Type: 65 degree set screw for maximum holding power
- Duty Rating: Intermediate duty with wide inner ring
- Bearing Series: 206 series (smaller ring with S suffix)
- Housing Material: Cast iron construction
- Seal System: DualGuard lip seal with flingers
- Mount Type: Non-expansion (fixed) bearing
- Applications: General industrial machinery, conveyor systems
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#6423543
Brand
Dodge
Model
056744
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#125286
Brand
Dodge
Model
P2B-SXVB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#123363
Brand
Dodge
Model
P2B-SC-012
#2271793
Brand
Browning
Model
767596
#326655
Brand
SKF Bearing
Model
FY 1.1/4 ARM
#276918
Brand
NTN Bearing
Model
ARFU-1.1/4S
| Brand | SolaHD |
| Model | SDN10-24-100P |
| Brand | Greenfield Threading |
| Model | 313598 |
| Brand | Bestorq |
| Model | BX148 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/