We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 130702 P2B-GTH-12-E two-bolt pillow block bearing with 3/4" bore, Grip Tight adapter mount, standard duty rating, cast iron housing, DualGuard seals, expansion design for thermal growth accommodation. 3/4" bore Pillow Block 2-Bolt Ball Bearing with Grip Tight locking used in General Purpose applications
MODEL P2B-GTH-12-E
Contact supplier for technical support on: +1-864-284-5700
$637.36 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
212 series
Base to center height
3.0000 in, 76.2 mm
Bearing type
Ball, ball
Bolt to bolt max
8.5000 in, 215.9 mm
Bolt to bolt min
7.5000 in, 190.5 mm
Bore
3/4 in
Bore length
2.1200 in, 53.848 mm
Duty
Standard Duty
Expansion
Yes
Expansion capability
Expansion (float)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 7/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Material
Steel
Max RPM
6000 rpm
Max Speed
4000 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Standoff housing
No
Static load capacity
8100 lbf, 36030.595 N
Suitable for high temperature
No
Suitable for washdown
No
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block bearing
- Bore Diameter: 3/4 inch
- Locking Type: Grip Tight adapter mount - 360° shaft contact, no shaft marring
- Housing Material: Cast iron
- Duty Rating: Standard duty
- Expansion Type: Expansion (float) - accommodates thermal shaft growth
- Bearing Series: 212 series
- Seal Type: DualGuard seals with flingers
- Max Speed: 4000 rpm
- Static Load Rating: 8100 lbf
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Cleveland |
| Model | C61901 |
| Brand | Airmaster |
| Model | 70013 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/