We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 126454 P2B-DLH-207-E two-bolt pillow block bearing with D-Lok concentric collar locking, 2-7/16" bore, expansion design for thermal shaft growth accommodation, cast iron housing, DualGuard seals, 212 bearing series. 2-7/16" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DLH-207-E
Contact supplier for technical support on: +1-864-284-5700
$570.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
212 series
Base to center height
3.0000 in, 76.2 mm
Bearing type
Ball, ball
Bolt Diameter
0.7500 in
Bolt to bolt max
7.5000 in, 190.5 mm
Bolt to bolt min
7.5000 in, 190.5 mm
Bore
2 7/16 in
Bore length
2.3800 in, 60.452 mm
Duty
Standard Duty
Expansion
Yes
Expansion capability
Expansion (float)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 7/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
3500 RPM
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft diameter
2.4375 in
Standoff housing
No
Static load capacity
8100 lbf, 36030.595 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block mounting
- Bore Diameter: 2-7/16" (61.912mm) shaft size
- Locking Type: D-Lok concentric collar for precise concentricity
- Expansion Design: Float bearing accommodates thermal shaft growth
- Housing Material: Cast iron construction
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 212 series ball bearing insert
- Sealing: DualGuard seals with flingers for contamination protection
- Applications: General industrial equipment requiring axial float capability
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#128095
Brand
Dodge
Model
P2B-DLH-207-E
#130121
Brand
Dodge
Model
P2B-SC-207-HT
#2247194
Brand
Dodge
Model
127328
#2257597
Brand
SealMaster
Model
705667
| Brand | Remco Products |
| Model | 69596 |
| Brand | Siemens Controls |
| Model | 3SU1400-1AA10-1QA0 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/