We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 123171 P2B-SCB-104S two-bolt pillow block bearing with 1-1/4" bore and set screw locking. Cast iron housing, standard duty rating, 206 series ball bearing with DualGuard seals. Non-expansion design for fixed positioning. 1-1/4" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCB-104S
Contact supplier for technical support on: +1-864-284-5700
$105.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
206 series
Base to center height
1.5600 in, 39.624 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.0000 in, 127.0 mm
Bolt to bolt min
4.2500 in, 107.95 mm
Bore
1 1/4 in
Bore length
1.5200 in, 38.608 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
6500 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 1-1/4" (31.75mm) with 206 series ball bearing
- Locking Type: Set screw with 65-degree angle for maximum holding force
- Duty Rating: Standard duty for general industrial applications
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Sealing: DualGuard seal with rubberized flinger protection
- Maximum Speed: 6,500 RPM rated
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#130777
Brand
Dodge
Model
P2B-SCB-104S
#792188
Brand
Dodge
Model
128353
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#792190
Brand
Dodge
Model
128355
| Brand | NK North America Inc. |
| Model | K0645.2541310X25 |
| Brand | JET Tools |
| Model | 351050 |
| Brand | Modicon |
| Model | 140DAI54000 |
| Brand | Bondhus |
| Model | 11054 |
| Brand | Cooper Wiring |
| Model | 5132B-BOX |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/