We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 129653 F4B-GT-115 four-bolt flange mounted ball bearing with 1-15/16" bore, Grip Tight adapter locking, cast iron housing, DualGuard seals, and normal duty rating for general industrial applications. 1-15/16" bore 4-Bolt Flange Ball Bearing with Grip Tight locking used in General Purpose applications
MODEL F4B-GT-115
Contact supplier for technical support on: +1-864-284-5700
$223.20 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Bearing type
Ball, ball
Bolt to bolt max
4.3800 in, 111.252 mm
Bolt to bolt min
4.3800 in, 111.252 mm
Bore
1 15/16 in
Bore length
2.0100 in, 51.054 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
High temp
No
Housing
Polymer
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
2 1/5 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Max RPM
7500 rpm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Push-pull adapter
Shaft diameter
1.9375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange mount for surface mounting applications
- Bore Diameter: 1-15/16" (49.212mm) shaft size
- Locking Type: Grip Tight adapter mount with 360° shaft contact, no shaft marring
- Housing Material: Cast iron construction for general industrial use
- Duty Rating: Normal duty for standard industrial loads
- Sealing: DualGuard seals with flingers for contamination protection
- Configuration: Non-expansion (fixed) bearing for shaft positioning
- Applications: General industrial machinery, conveyors, and equipment requiring flange mounting
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Wiegmann |
| Model | HW-WM3020CS |
| Brand | NK North America Inc. |
| Model | K0329.05 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/