We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 131819 P2B-SXR-203 two-bolt pillow block bearing with quarter-turn eccentric collar locking mechanism. 2-3/16" bore diameter, 211 series, standard duty cast iron housing, non-expansion fixed design. 2-3/16" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL P2B-SXR-203
Contact supplier for technical support on: +1-864-284-5700
$203.04 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
211 series
Base to center height
2.5000 in, 63.5 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
2 3/16 in
Bore length
2.5900 in, 65.786 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 3/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Material
Steel
Max RPM
4000 rpm
Max Speed
2500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
2.1875 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Engineering Number: P2B-SXR-203
- Bore Diameter: 2-3/16" (55.562mm)
- Housing Type: Two-bolt pillow block mounting
- Locking Mechanism: Quarter-turn eccentric collar locks in direction of shaft rotation
- Bearing Series: 211 series ball bearing
- Duty Rating: Standard duty for general purpose applications
- Housing Material: Cast iron construction
- Expansion Type: Non-expansion (fixed) bearing locates shaft position
- Seal Protection: DualGuard seal with rubberized flinger
- Max Speed: 2500 RPM capability
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
When you decide to install a roller or radial bearing, it is prudent to ensure it is done properly following the right procedure and tools. Besides, you have to ensure that all safety procedures are followed. Remember that no matter what: “You have to get it right the first time".
Read More
#132328
Brand
Dodge
Model
P2B-SXVB-103
#128795
Brand
Dodge
Model
P2B-SXR-25M
#133651
Brand
Dodge
Model
P2B-SXRB-203
#133670
Brand
Dodge
Model
P2B-SXRB-102
#131409
Brand
Dodge
Model
P2B-SXR-203
#269062
Brand
NTN Bearing
Model
UELP-2.3/16
#498358
Brand
Link-Belt
Model
10414005
| Brand | Consolidated Bearings |
| Model | 1301 |
| Brand | Cleveland |
| Model | C32043 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/