We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 124224 FC-SC-104 piloted flange mounted ball bearing with 1-1/4" bore, 65-degree set screw locking, cast iron housing, normal duty rating, DualGuard seal, 207 series, non-expansion design for precise shaft positioning. 1-1/4" bore 4-Bolt Piloted Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL FC-SC-104
Contact supplier for technical support on: +1-864-284-5700
$140.04 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Bearing type
Ball, ball
Bolt circle
4.1300 in, 104.902 mm
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1300 in, 104.902 mm
Bolt to bolt min
4.1300 in, 104.902 mm
Bore
1 1/4 in
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Uncoated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
1 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
5500 rpm
Max Speed
3500 RPM
Pilot depth
0.3800 in, 9.652 mm
Pilot diameter
3.3750 in, 85.725 mm
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Piloted Flange (FC) - Round piloted flange with bolt circle
- Bore Diameter: 1-1/4" (31.75mm) with 207 series ring
- Locking Type: 65-degree set screw (SC) for maximum holding power
- Housing Material: Cast iron Class 25/30 for standard indoor applications
- Duty Rating: Normal duty for general industrial use
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Seal: DualGuard single lip seal with rubberized flinger
- Max Speed: 3,500 RPM
- Applications: Surface mount applications requiring piloted locating feature
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5002847
Brand
Dodge
Model
P2B-SXRBED-104S
#125628
Brand
Dodge
Model
P2B-DLB-104S
#131685
Brand
Dodge
Model
FC-SC-104
#131747
Brand
Dodge
Model
P2B-SC-104S-HT
#129393
Brand
Dodge
Model
P2B-SXR-104S
#2272495
Brand
Browning
Model
VFCS-320
| Brand | Balax |
| Model | 17353-01T |
| Brand | Bestorq |
| Model | 8VX1320 |
| Brand | Cleveland |
| Model | C41331 |
| Brand | Omron |
| Model | E2E-X10E1 |
| Brand | Orbit Industries |
| Model | FB-75 |
| Brand | Regal Cutting Tools |
| Model | 072385MS |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/