We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 129193 P2B-GTB-108 two-bolt pillow block bearing with 1-1/2" bore, Grip Tight locking mechanism, non-expansion (fixed) configuration. Cast iron housing with DualGuard seal system, standard duty ball bearing design. 1-1/2" bore Pillow Block 2-Bolt Ball Bearing with Grip Tight locking used in General Purpose applications
MODEL P2B-GTB-108
Contact supplier for technical support on: +1-864-284-5700
$169.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Base to center height
1.9400 in, 49.276 mm
Bearing type
Ball, ball
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.1800 in, 131.572 mm
Bore
1 1/2 in
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Shaft diameter
1.5000 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with cast iron construction
- Bore Diameter: 1-1/2" (38.1mm) shaft size
- Locking Mechanism: Grip Tight adapter mount with 360° shaft contact
- Expansion Type: Non-expansion (fixed) bearing configuration
- Seal System: DualGuard single lip seal with rubberized flinger
- Duty Rating: Standard duty ball bearing design
- Weight: 4.73 lbs for reliable installation
- Application: No shaft marring, ideal for turned, ground, or polished shafts with easy dismount feature
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/