We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 125830 INS-SCM-40M ball bearing insert with 40mm bore diameter. Medium duty setscrew locking mechanism with DualGuard seal system. Wide inner ring design for enhanced load capacity and 3000 RPM maximum speed rating. 40mm bore Standard Duty Ball Bearing Insert with Set Screw locking used in General Purpose applications
MODEL INS-SCM-40M
Contact supplier for technical support on: +1-864-284-5700
$98.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Bearing type
Ball, ball
Bore
40mm
Duty
Medium duty
Expansion
No
Greasable
Yes
High temp
No
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Max Speed
3000 rpm
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Shaft attachment
Setscrew
Shaft diameter
40.0000 mm
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Type
Ball bearing insert
- Product Type: Ball bearing insert (no housing)
- Bore Diameter: 40mm (1.5748")
- Locking Mechanism: 65-degree setscrew for maximum shaft grip
- Duty Rating: Medium duty for enhanced load capacity
- Seal System: DualGuard seals with rubberized flingers
- Maximum Speed: 3000 RPM
- Static Load Rating: 4,906 lbf (21,823 N)
- Weight: 1.59 lbs
- Applications: Industrial machinery requiring higher load capacity than normal duty bearings
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Simplex |
| Model | RCD1006A |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/