MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Nachi Bearing 7310B Angular Contact Ball Bearing Single 40 50mm Inner Diameter x 110mm Outer Diameter x 27mm Width Angular Contact Ball Bearing - Single - 40�
MODEL 7310B
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 800-829-5787
$77.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable:No
Bore Type
Cylindrical
Cage Material
JIS SPCC Steel
Contact Angle (Deg)
40
Dynamic Load Capacity (N)
70500
Grease Fill
No Fill
Inner Diameter (mm)
50
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
CN/C0
ISO Precision Class
P0
Limiting Speed - Grease (RPM)
5000
Limiting Speed - Oil (RPM)
6700
Max Operating Temp.
120°C (248°F)
Outer Diameter (mm)
110
Outer Ring Material
JIS SUJ2 Steel
Preload
N/A
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Snap Ring
No
Static Load Capacity (N)
49500
Universally (Flush) Ground
No
Width (mm)
6700
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. The BMU bearings are commonly referred to as thrust bearings. These bearings have a 40 deg contact angle to accept heavy axial loads. The bearings have Universally Flush Ground rings to facilitate mounting in multiple bearing sets. The inner and outer rings have identical widths. These bearings can be mounted as DB, DF and DT pairs or can be combined into triplex and quadraplex sets. When two bearings are mounted together, a clearance or preload may be obtained without the use of shims or spacers. This bearing has a machined brass cage and is not available with seals or shields. These bearings are most commonly used in vertical pump and motor applications. Higher precision. Increased speed and load carrying capacity. Support radial, axial or composite loads in only one direction. Capable of moment loads if used in pairs. Machined brass cage. Energy efficient. Low noise. The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. This bearing type is generally used in adjacent positions.
#313885
Brand
SKF Bearing
Model
7310 BECBM
#313791
Brand
SKF Bearing
Model
7310 BECBY
#313716
Brand
SKF Bearing
Model
7310 BEP
#313591
Brand
SKF Bearing
Model
7310 BECBJ
#277603
Brand
NTN Bearing
Model
7310BG
#2889887
Brand
Rollway
Model
7310 B
#2889888
Brand
Rollway
Model
7310 BM
#277602
Brand
NTN Bearing
Model
7310BL1BG
| Brand | Dodge |
| Model | 037628 |
| Brand | NTN Bearing |
| Model | 9380/9321 |
| Brand | Dodge |
| Model | F4B-SCEZ-107-PSS |
| Brand | Boston Gear |
| Model | 30219856 |
| Brand | Dixon |
| Model | LHW |
| Brand | FYH Bearing |
| Model | UCPX09 27 |
| Brand | FAG Bearing |
| Model | 6009RSR |
| Brand | Koyo Bearing |
| Model | 6212 2RD |