We never sell your data to third parties
Dodge 079856 P2B-SC-50M-HT MODS two-bolt pillow block bearing with 50mm bore, 65-degree set screw locking, high temperature rating to 400°F, normal duty cast iron housing, DualGuard seals, 210 series ball bearing, non-expansion design for fixed shaft 50mm bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-50M-HT MODS
Contact supplier for technical support on: +1-864-284-5700
$384.68 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
210 series
Base to center height
2.2500 in, 57.15 mm
Bearing Series
210 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
6.6800 in, 169.672 mm
Bolt to bolt min
6.0000 in, 152.4 mm
Bore
50mm
Bore length
1.9400 in, 49.276 mm
Bore Size
50mm
Duty
Standard Duty
Duty Rating
Normal duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Greasable
Yes
High temp
Yes
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
50
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65-degree set screw
Lubrication type
Grease
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Labyrinth
Seal Type
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
50.0000 mm
Standoff housing
No
Suitable for high temperature
Yes
Suitable for washdown
No
Take-up frame size
LD-30, TS-300
Temperature Rating
High temperature to 400°F
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron
- Bore Size: 50mm
- Locking Type: 65-degree set screw
- Duty Rating: Normal duty
- Temperature Rating: High temperature to 400°F (204°C)
- Bearing Series: 210 series ball bearing
- Expansion Type: Non-expansion (fixed)
- Seal Type: DualGuard seals with flingers
- Applications: High temperature environments, metric shaft applications, general industrial machinery
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Balax |
| Model | 10122-010 |
| Brand | Gates Rubber |
| Model | 4430V1320 |
| Brand | NK North America Inc. |
| Model | K1524.125122046 |
| Brand | Chicago-Latrobe |
| Model | 45369 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/