We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt FX3S216E1 (mfg part 10415178) is a 2-bolt flange ball bearing with a 1" bore, set screw locking, and a cast iron housing. It features a Viton single lip contact seal, C5 increased clearance, and is pre-lubricated with Almasol 1250 hi-temp grease. This fixed (non-expansion) unit is rated for intermediate duty and operates at up to 6800 rpm.
MODEL 10415178
Contact supplier for technical support on: 800-626-2120
$171.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Ability to Relubricate
Yes
Adjustment slot width (in)
Active in
Adjustment Slot Width (mm)
True mm
Available end cap
No
Bearing Insert Material
52100 Bearing Steel
Bolt hole spacing (width) (in)
3.8891
Bore Shape
Straight
Bore size (in)
1 in
Cage Material
Steel
Cage Type
Ball Riding Retainer
Distance between bolt holes (in)
3 57/64
Distance from housing cast face to inner ring long hub face (in)
7/16 in
Distance from mounting surface to outer most bearing face (in)
1 5/16 in
Duty/Series
Intermediate duty
Fixed vs. Expansion
Fixed
Foot Height (in)
0.5
Grease Fitting Thread Size
1/4-28
Height
1.50
Housing coating
Powder coated
Housing Color
Black
Housing construction
One Piece
Housing length (in)
4 7/8 in
Housing material
Cast iron
Housing style
Flange block
Housing type
Flange, Two Bolt
Inner Ring Outside Diameter (in)
1.313
Insert
SG216E1LPA
Length
3.88
Length Through Bore (in)
1.178
Locking Type
Set screw
Lubrication type
ALMASOL 1250 HI-TEMP
Max distance between bolt holes (in)
E Lip Seal;E1 Viton Seal;FF Free Running;HFF Free Running;MHFF Free Running
Maximum Speed (RPM)
6800 RPM
Maximum Temperature (C)
204 C
Maximum Temperature (F)
400 F
Misalignment Capability
±2.0° Misalignment - Static Only
Misalignment Type
Static Only
Mounted clearance
C5 increased
Mounting bolt size (in)
7/16 in
Mounting Housing Width (in)
1/2 in
Outer Ring Land Profile
Standard
Pilot Configuration
No Pilot
Primary seal
Viton single lip contact seal
Radial Dynamic Load Capacity (lb)
3150 lb
Radial Static Load Capacity (lb)
1760 lb
Retainer type
Steel
Rolling element
Ball Bearing
Seal type
High Temperature Contact Seal
Setscrew torque (in-lbs)
87-92 in/lbs
Size code
205
Unit of dimension
in
Vibration frequency fundamental train
0.0067 cps
Vibration frequency inner ring defect
0.0905 cps
Vibration frequency outer ring defect
0.0595 cps
Vibration frequency roller spin
0.0387 cps
Volume
0.369
Volume unit
CDM
Width
3.88
1" Mounted Ball Bearing, Intermediate Duty, Cast Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Viton Contact Seal, Increased Clearance, Steel Retainer, Special Lubricant
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
