We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN CS210LLU deep groove ball bearing with 50 mm straight bore, double sealed for contaminant protection. Through hardened steel construction with steel cage. Suitable for general industrial rotating equipment.
MODEL CS210LLU
$60.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Axial Static Load Rating
5216 lbf
Axial static load rating
5216 lbf
B4
0.7870 in
Ball Material
Through Hardened Steel
Ball material
Through hardened steel
Bore Type
Cylindrical
Bore type
Cylindrical
Cage Material
Pressed Steel
Cage material
Pressed steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
3.5430
d (in)
1.9690
Dynamic Load Rating
7869 lbf
Dynamic load rating
7869 lbf
Enclosure
Full Contact Seal - Both Sides
Height
3.543
Housing Width
0 in
Housing width
0 in
I.D.
50 mm
Length
3.543
Material
Through hardened steel
Number of Holes
0
Number of holes
0
O.D.
90 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Outside Ring Type
Spherical OD
Precision
ISO class 0
r (in)
0.0433
Radial Dynamic Load Rating
7868 lbf
Radial Internal Clearance
CN
Radial internal clearance
CN
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
5216 lbf
Static load rating
5216 lbf
Total Length
0.0000 in
Total length
0.0000 in
Type
Deep Groove Ball Bearing
Width
0.7874
Technical Specifications
| Type | Deep Groove Ball Bearing |
|---|---|
| Bore Type | Round |
| Material | Through Hardened Steel |
| Cage Type | Pressed |
| Cage Material | Steel |
| Seal Type | Contact |
| Seal Material | Nitrile Rubber |
| Outside Ring Type | Spherical |
| Ball Material | Steel |
| Precision | Class 0 |
| Configuration | One |
| Radial Internal Clearance | CN |
| Static Load Rating | 5200 lbf23200 N23.20 kN |
| Dynamic Load Rating | 7870 lbf35000 N35.00 kN |
| Enclosure | Double Sealed |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 1.9685 in50.000 mm |
|---|---|
| D | 3.5433 in90.000 mm |
| B4 | 0.7874 in20.000 mm |
| r | 0.0433 in1.100 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Consolidated Bearings |
| Model | 61805-2RS |
| Brand | Hammond Power Solutions |
| Model | SG3A0045BY |
| Brand | Vikan |
| Model | 77554WB |
| Brand | Gates Rubber |
| Model | P30-8MGT-50 |
