We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN 6205LU 62 series single-row deep groove ball bearing with a 25 mm straight bore. Features a single rubber contact seal (LU) on one side and a stamped steel cage. Designed for general industrial rotating equipment such as electric motors, pumps, and fans.
MODEL 6205LU
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$25.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable:No
B (in)
0.5906
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
d (in)
0.9843
D (in)
2.0472
Da max
1.8504 in
da max
1.2598 in
da min
1.1811 in
Dynamic Load Rating
3480 lbf
Dynamic load rating
3480 lbf
Enclosure
Single Sealed
Factor
47.0
I.D.
25 mm
Limiting Speed - Grease
8900 RPM
Limiting speed - grease
8900 RPM
Material
High carbon chrome steel
O.D.
52 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0394
r1
0.0197 in
Radial Internal Clearance
CN
Radial internal clearance
CN
ras max
0.0394 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
1760 lbf
Static load rating
1760 lbf
Type
Deep Groove Ball Bearing
Technical Specifications
Type | Deep Groove Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 8900 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Precision | ISO Class 0 |
Configuration | One |
Factor | 47.0 |
Radial Internal Clearance | CN |
Static Load Rating | 1760 lbf7850 N7.85 kN |
Dynamic Load Rating | 3150 lbf14000 N14.00 kN |
Enclosure | Single Sealed |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 0.9843 in25.000 mm |
|---|---|
D | 2.0472 in52.000 mm |
B | 0.5906 in15.000 mm |
r | 0.0394 in1.000 mm |
r1 | 0.0197 in0.500 mm |
da min | 1.1811 in30.000 mm |
da max | 1.2598 in32.000 mm |
Da max | 1.8504 in47.000 mm |
ras max | 0.0394 in1.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#5033698
Brand
NSK Bearings
Model
6205DU
#2175505
Brand
FAG Bearing
Model
6205RSR
#319840
Brand
SKF Bearing
Model
6205-RSH
| Brand | Chicago-Latrobe |
| Model | 70226 |
| Brand | Turck |
| Model | NI 8-M18-AP6X-H1141 |
| Brand | NK North America Inc. |
| Model | K0123.3A46X25 |
| Brand | Siemens Controls |
| Model | 3RV1901-1E |
| Brand | Hydraulic Technologies |
| Model | FLS15-ST |
