We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt W216EL 10435640 is an unmounted ball bearing with a 1" bore and eccentric locking collar. This intermediate-duty bearing features a Buna single-lip contact seal, nylon retainer, and C3 clearance. It is part of the Link-Belt 200 series ball bearing line, designed for general industrial applications.
MODEL 10435640
Contact supplier for technical support on: 800-626-2120
$36.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Available seal type
E lip seal
Bearing Type
Intermediate duty ball brg
Bore length (in)
1 7/32 in
Bore size (in)
1
C dynamic load rating
3150 lb
Co static load rating
1760 lb
Height
1.50
Inner ring hub diameter (in)
1.210 in
Inner ring width
0.844 in
Length
2.50
Locking collar outside diameter (in)
1 1/2 in
Locking collar width (in)
17/32 in
Locking device kit
W2165S
Lubrication type
EXXON RONEX MP STD
Max Speed
6800 RPM
Max temperature (°F (°C))
225 (107) F (C)
Maximum Temperature (C)
107
Mounted clearance
C3 standard
Outer Ring Width (in)
0.5906 in
Outside diameter (in)
2.0472 in
Primary seal
BUNA single lip contact seal
Retainer type
Nylon
Service instructions
BR3-007 LB 200 ball-300 ball
Setscrew torque (in-lbs)
87-92 in/lbs
Shaft diameter (in)
1 in
Shaft locking
Eccentric locking collar
Short Hub Length (in)
0.2953 in
Size code
205
Type of seal
E lip seal
Unit of dimension
in
Vibration frequency fundamental train
0.0067 cps
Vibration frequency inner ring defect
0.0905 cps
Vibration frequency outer ring defect
0.0595 cps
Vibration frequency roller spin
0.0387 cps
Volume
153.629
Volume unit
Cubic centimeter
Width
2.50
1" Unmounted Ball Bearing, Intermediate Duty, Eccentric Cam Locking Collar, Single Lip Contact Seal, Spherical OD, Non-Relubricatable
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bondhus |
| Model | 12974 |
| Brand | JW Winco |
| Model | 807-M6-49-A |
| Brand | Bestorq |
| Model | B76LG |