We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Timken 62302-2RS-C3 is a deep groove ball bearing with a 150 mm bore and C3 radial internal clearance. It features contact rubber seals (2RS) on both sides for protection against contamination. This bearing has a dynamic load rating of 11.4 kN and a static load rating of 5.4 kN, suitable for general industrial applications.
MODEL 62302-2RS-C3
$49.16 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
1.5748 in O.D. (in)
109.993 mm 4.3304 Outer ring to clear radius:0.080 in Outer ring backing diameter:98.000 mm
1.5748 in Reference thermal speed rating (grease)
4700 RPM Reference thermal speed rating (oil):5600 Static radial rating:225000 N
2.600 in Inner ring width
40 mm
3.900 in Outer ring width
40 mm
50600 lbf Superseded part
22310YMW33W800C4
51000 lbf Geometry factor
0.0549 ISO factor:2.81 Inner ring to clear radius:0.080 in Inner ring backing diameter:65.00 mm
Bore
15 mm
Bore Size d
15 mm
C0r - Static Load Rating
5400 N
Cage material
Brass Cage type:EM Design unit:Metric Dynamic radial rating (two-rows):227000 N
Clearance
C3
Cr - Dynamic Load Rating
11400 N
Dynamic load rating
11.4 kN
Features
Contact Seals
Grease limiting speed
19000 rpm
Grease Limiting Speed
19000 rpm
Grease reference speed
19000 rpm
Outside Diameter D
42 mm
Outside Ring Width B
17 mm
Radius Rs min
1 mm
Static load rating
5.4 kN
Timken’s deep groove ball bearings deliver reliable performance in a wide range of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NSK Bearings |
| Model | 22217HE4 |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more