MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
$110.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Axial Internal Clearance
Not applicable
Basic Dynamic Load Rating
22.5 kN
Basic Static Load Rating
14.3 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
30 mm
Cage
Molded Polymer
Coating
Without
Contact Angle
40 °
Contact Type
Normal contact (two-point contact)
I.D.
0.984 in
Limiting Speed
10000 r/min
Lubricant
Grease
Matched Arrangement
No
Number of Rows
1
O.D. (in)
2.047
Pack Height
67 mm
Pack Length
65 mm
Pack Width
22 mm
Reference Speed
13000 r/min
Relubrication Feature
Without
Ring Type
One-piece inner and outer rings
Sealing
Seal on both sides
Sealing Type
Non-contact
Tolerance Class
Normal
Universal Matching Bearing
No
Width
16 mm
These single row angular contact ball bearings, with 40° contact angle and non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They have a ball-centred glass-fibre reinforced PA66 cage. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
- 40° contact angle
- Integral sealing prolongs bearing service life
- Glass-fibre reinforced PA66 cage
- Accommodate relatively high radial loads and large unilateral axial loads
#1133306
Brand
MRC Bearing
Model
7206PJDU
#314051
Brand
SKF Bearing
Model
7206 BEGAP
| Brand | Leeson |
| Model | 108045.00 |
| Brand | PEER Bearing |
| Model | F-205-H |
| Brand | Smith Bearings |
| Model | HR-5/8-X |
| Brand | Dodge |
| Model | WSTU-DLM-215 |
| Brand | SKF Bearing |
| Model | 32210 |
| Brand | Krylon |
| Model | A04405007 |
| Brand | Purdy |
| Model | 140624612 |
| Brand | FAG Bearing |
| Model | 61968M |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF