We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
TB Woods 5S X 7/8 Sure-Flex Plus Type S flange with 7/8" finished bore for a Size 5 elastomeric sleeve coupling. Compatible with EPDM, Neoprene, Hytrel, and Urethane sleeves; rated up to 720 in-lb continuous torque with EPDM/Neoprene and 2,160 in-lb with Hytrel.
MODEL 5S X 7/8
Contact supplier for technical support on: 888-829-6637
$28.53 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Specifications
Bore diameter: 0.8750 in
Hub material: Steel
Flange diameter: 3.2500 in
Coupling overall length: 1-7/8 in
Length through bore: 1-11/32 in
Hub end outside diameter: 2-13/16 in
Hub flange type code: S
Torque capacity:240 in-lbs
Coupling size code: 5
Maximum rpm: 7600 RPM
Bore type: Finished w/ Keyway
Horsepower @ 100 rpm: 0.4 (EPDM & Neoprene) hp
Hub type: Spacer Flange
Series: Sure-Flex
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Slew ring bearings, also referred to as slewing bearings, slewing rings, or turntable bearings, are forms of bearings designed to allow rotational motion between several components.
Read More
| Brand | Bondhus |
| Model | 12974 |
| Brand | JW Winco |
| Model | 807-M6-49-A |
SKU: 336840
Muy buen servicio y rapidez en la entrega
Primera vez q compro con esta compañía, recomiendo ampliamente comprar con ellos y claro q volveria a comprar otra vez muy buen servicio y entrega rapida
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in TB Wood's Terms and Conditions.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Terms%20and%20Conditions.html
3. Claims for refunds or replacements must be made to the factory. Products may be returned only after written approval and a returned goods authorization number has been received from Customer Service or Application Engineering. Return shipments must be prepaid (Refer to Returned Goods Policy). Final decision about refund or replacement rests solely with TB Wood's Incorporated.
--
Disclaimer: The return policy featured below is for distributors only. Also, it is merely a copy of the text from TB Wood's Distributor Policy and Procedures.
File: http://documents.mrosupply.com/file_uploads/TB%20Woods%20Distributor%20Policies%20and%20Procedures.pdf
Returned Goods
The policy for returning products for defects in workmanship or materials is covered under the “Product Reliability” section.
Distributors and, occasionally, OEMs may want to return products that are overstocked or slow moving. Prior approval and a returned goods authorization number must be obtained from Customer Service or Application Engineering. This number must be referenced on the returned goods shipment. It allows us to identify the contents of the shipment, the Distributor who originated it and the reason for return. Freight must be prepaid.
Products returned for reasons other than factory authorized stock adjustments must have approval from Customer Service or Application Engineering and a returned goods authorization number. They must be sent by prepaid freight and will be subject to a 15% restocking charge. There will be additional charges as necessary for re-boxing and refurbishing. Returned goods must have been manufactured and/or sold by TB Wood’s Incorporated and must be in salable condition. They will be inspected at the factory and if reconditioning is necessary it will be charged to the Distributor. We reserve the right to reject unsalable products.
No products will be accepted for return or exchange if they are obsolete.