MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF Bearing 6301-2Z/C3 SINGLE ROW BALL BRGS
MODEL 6301-2Z/C3
$17.80 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Basic Dynamic Load Rating
10.1 kN
Basic Static Load Rating
4.15 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
12 mm
Bore Type
Cylindrical
Cage
Steel
Clearance
C3
Coating
Without
Filling Slots
Without
I.D.
0.472 in
Limiting Speed
22000 r/min
Lubricant
Grease
Matched Arrangement
No
Number of Rows
1
O.D. (in)
1.457
Pack Height
47 mm
Pack Length
45 mm
Pack Width
17 mm
Reference Speed
45000 r/min
Relubrication Feature
Without
Sealing
Shield on both sides
Sealing Type
Non-contact
SKF Performance Class
SKF Explorer
Tolerance Class
Class P6 (P6)
Width
12 mm
Deep groove ball bearing with seals or shields
Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Integral sealing prolongs bearing service life
- Simple, versatile and robust design
- Low friction and high-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
#207537
Brand
Nachi Bearing
Model
6301ZZEC3
#320111
Brand
SKF Bearing
Model
6301 2ZJEM
#5034101
Brand
NSK Bearings
Model
6301ZZC3
#279066
Brand
NTN Bearing
Model
6301ZZC3/EM
| Brand | NTN Bearing |
| Model | RU8509TM |
| Brand | SKF Bearing |
| Model | 2201 ETN9 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF