We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Consolidated Bearings SDAF-224 PILLOW BLOCK HOUSING INCH
MODEL SDAF-224
$2,446.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Appropriate End Plug
epr-15
Dimension_C
6.875 in
Dimension_d1
4.5625 in
Dimension_E
13.875 in
Dimension_F
4.125 in
Dimension_H
5.25 in
Dimension_H1
10.5 in
Housing Only Approx. Wgt.lbs
91
I.d.
5.3125 in
Locknut
an-24
Lockwasher
W-24
Overall length_A
16.5 in
Stabilizing Rings Req'd / No.
SR-24-20
Stabilizing Rings Req'd / Qty.
1
Suitable for Bearings
22224-2
Triple Seals Req'd / Seal No. (a)
ler-127
Triple Seals Req'd / Seal No. (b)
ler-119
Triple Seals Req'd / Seal Qty. (a)
1
Triple Seals Req'd / Seal Qty. (b)
1
- Mounts a bearing safely enabling its outer ring to be stationary while allowing rotation of the inner ring
- Parts may not be interchangeable with parts from other manufacturers
- Triple ring seals with o-ring (LOR-) or Taconite seals ( TER-V ) can be used in place of the standard LER seal
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Consolidated Bearings |
| Model | 689-2RS |
| Brand | Bestorq |
| Model | 3VX710 |