We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Smith Bearing MVYR-250 Smith-Trax Metric Idler Roller V-Grooved Yoke Type cam follower with 290mm roller OD, 70mm bore, and tapered roller bearing (TRB). Features a V-grooved profile for track guidance, 79mm overall width, and 250mm point diameter. Dynamic thrust load rating 77,400 lbs at 500 hrs 33 rpm; radial basic dynamic rating 188,600 lbs. Bore diameter tolerance +0.00/-0.02 mm.
MODEL MVYR-250
Contact supplier for technical support on: 800-932-0076
$2,996.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Type
TRB
Bore Diameter
70
Bore Diameter Tolerance
+0.00/-0.02
Center of V-Groove
40
Dynamic Thrust Load Rating 500 hrs. 33 rpm.
77,400
Groove Dia.
76
Overall Width
79
Point Diameter
250
Radial Basic Dynamic Rating 500 hrs. 33 rpm.
188,600
Roller O.D.
290
Shoulder Length
1.5
Shoulder Width Or End Plate Diameter
108.0
SMITH Bearing Number
MVYR-250
Specifications
| Item Name: | Series MVYR V-Groove Yoke Style, Smith-Trax |
|---|---|
| Bearing Type: | TRB - Tapered Roller bearing |
| (D) Roller OD: | 290 mm |
| (B) Groove Diameter: | 76 mm |
| (A) Bore Diameter: | 70 mm |
| (W) Overall Width: | 79 mm |
| (V) Point Dia.: | 250 mm |
| (C) Groove Center: | 40 mm |
| (R) Shoulder Width or End Plate Diameter: | 108.0 mm |
| Radial Basic Dynamic Rating 500 hrs.33 rpm.: | 188600 Newtons |
| Dynamic Thrust Load Rating 500 hrs.33 rpm.: | 77400 Newtons |
| Osbron P/N: | HPVA–250 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Gates Rubber |
| Model | 2/5VX1000 |
| Brand | NSI Industries |
| Model | BT-305 |
| Brand | Precision Twist Drill |
| Model | QC41GN12 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.