Categories

Subtotal

View cart
Add products to your shopping cart
#1132205

Image for Illustration purposes only. Actual product may vary

MRC 210RDU ANGULAR CONTACT BALL BRGS

$110.00 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 1.1 lb

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 1.1 lbs.
Product Name: 200-RD Light Series Duplex Ball Bearing
Description: 50 mm ID x 90 mm OD x 20 mm Wide; Open; No Snap Ring; Single Row Angular Contact Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.50 mmO.D. [Min]
O.D. [Max]O.D.90 mm
Width [Min]Width [Max]
Width20 mmEnclosureOpen
Rows of BallsSingleMaterialSteel
O.D. TypeStraightBearing TypeAngular Contact
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle15°
Guide TypeLubrication
Outer Ring Width20 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialNone
Seal TypeUnsealedSeal Width
Dynamic Load Rating13600 lbfStatic Load Rating [Max]13500 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width20 mm
Internal DesignUniversal MountingLimiting Speed
Limiting Speed - Grease5600 rpmLimiting Speed - Oil6800 rpm
Limiting Speed - SealedLocking DeviceNo Locking Device
Lube Hole CenterLubricantOil Preservative
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]Temperature Range [Max]450 °F
Use With  
Product Information
Applications
  • Duplex bearings should be used for two-directional thrust loads
  • Features
  • Bearings are made with bore diameters ranging from 10 mm to 320 mm
  • 15° angular contact bearings with one heavy race shoulder and one counterbored race shoulder on the outer ring
  • Incorporates a greater number of balls than in the deepgroove nonfilling notch bearing
  • Normally furnished with ABMA C3 radial clearance
  • Cage types and materials available are two-piece pressed steel, ball riding, bent prong cages
  • Documents

    Specifications:

    Cage Metal
    I.D. 1.969
    Locking None
    O.D. 3.543
    Bearing Type Angular Contact
    Enclosure Open

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning