Categories

Add products to your shopping cart

Subtotal

View cart
  • BRAND: MRC Bearing
  • SKU: 1132974
  • CONDITION: NEW
  • MODEL: 5211MFF

MRC 5211MFF DOUBLE ROW BALL BRGS

$110.00 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 2.3 lb

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 2.298 lbs.
Product Name: 5200-M Light Series Bearing
Description: 55 mm ID x 100 mm OD x 1 5/16" Wide; Double Shielded; No Snap Ring; Maximum Capacity; Double Row Ball Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.55 mmO.D. [Min]
O.D. [Max]O.D.100 mm
Width [Min]Width [Max]
Width33.3375 mmEnclosureDouble Shielded
Rows of BallsDoubleMaterialSteel
O.D. TypeStraightBearing TypeAngular Contact
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityMaximum CapacityContact Angle30°
Guide TypeLubrication
Outer Ring Width1 5/16 inPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialMetal
Seal TypeNon-Contact SealsSeal Width
Dynamic Load Rating14900 lbfStatic Load Rating [Max]17200 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 1/2 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width1 5/16 in
Internal DesignLimiting Speed
Limiting Speed - Grease4300 rpmLimiting Speed - Oil5600 rpm
Limiting Speed - Sealed4300 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantChevron SRI-2
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]-22 °FTemperature Range [Max]250 °F
Use With  
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
  • Thrust load should be carried on the nonfilling notch row
  • Moderate thrust load is permissible on the filling notch row
  • Features
  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction, with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring
  • Specifications:

    Cage Metal
    I.D. 2.165
    Locking None
    O.D. 3.937
    Bearing Type Angular Contact
    Enclosure Double Shielded

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning