Categories

Subtotal

View cart
Add products to your shopping cart
#1132986

Image for Illustration purposes only. Actual product may vary

MRC 5212CZZG DOUBLE ROW BALL BRGS

$100.00 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 2.7 lb

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 2.734 lbs.
Product Name: 5200-C, 5200-SB Light Series Bearing
Description: 60 mm ID x 110 mm OD x 1 7/16" Wide; Double Sealed; With Snap Ring; Standard Capacity; Double Row Ball Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.60 mmO.D. [Min]
O.D. [Max]O.D.110 mm
Width [Min]Width [Max]
Width36.5125 mmEnclosureDouble Sealed
Rows of BallsDoubleMaterialSteel
O.D. TypeStraight w/ Snap RingBearing TypeAngular Contact
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle30°
Guide TypeLubrication
Outer Ring Width1 7/16 inPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialRubber
Seal TypeContact SealsSeal Width
Dynamic Load Rating15800 lbfStatic Load Rating [Max]13200 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 1/2 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width1 7/16 in
Internal DesignLimiting Speed
Limiting Speed - Grease3800 rpmLimiting Speed - Oil5000 rpm
Limiting Speed - Sealed3800 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantChevron SRI-2
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingWith Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]-22 °FTemperature Range [Max]250 °F
Use With  
Product Information
Applications
  • Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
  • Bearings will take heavy radial loads and axial loads equally in either direction
  • Features
  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring
  • Specifications:

    Cage Metal
    I.D. 2.362
    Locking None
    O.D. 4.331
    Bearing Type Angular Contact
    Enclosure Double Sealed

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning