View cart
Add products to your shopping cart

Image for Illustration purposes only. Actual product may vary

CR-3-1/2-X Stud Type Screwdriver slot Sealed Needle Bearing Cam Follower

$140.00 Each


  • Typically ships in: 1 day
  • Weight: 6.4 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

(D) Roller O.D. 3.500
(B) Roller Width 2.000
(A) Stud Dia. 1.375
(M) Stud Length 2-3/4
Basic Dynamic Rating (lbs) 29660
(S) Eff. Thread Min. 1-3/8
(A) Stud Dia. Tolerance +.001/-.000
(B) Roller Width Tolerance +.000/-.005
(D) Roller O.D. Tolerance +.000/-.001
(E) Min. Boss Dia. 2
(H) Oil Hole Dia. 1/4
(N) Oil Hole Location 11/16
(P) Lube Fitting Size 1/4
(T) Thread U.N.F. Class 2A 1-3/8-12
Max. Static Capacity (lbs) 31800
Recom. Bore 1.3750
Recom. Bore Tolerance N/A
Recom. Torque (lbs-in) 6000
SMITH Bearing Number CR-3-1/2-X


CAD Documents


Roller Width 2.000
Lube Fitting Size 1/4
Roller Width Tolerance +.000/-.005
Oil Hole Location 11/16
Stud Dia. 1.375
Roller O.D. Tolerance +.000/-.001
Thread U.N.F. Class 2A 1-3/8-12
Recom. Bore 1.3750
Max. Static Capacity (lbs) 31800
Roller O.D. 3.500
Eff. Thread Min. 1-3/8
Recom. Torque (lbs-in) 6000
Oil Hole Dia. 1/4
Basic Dynamic Rating (lbs) 29660
SMITH Bearing Number CR-3-1/2-X
Stud Dia. Tolerance +.001/-.000
Min. Boss Dia. 2
Stud Length 2-3/4

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.


ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.

ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:

a. Product brand name

b. Quantity

c. IDC-USA’s product identification number

d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.

AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.

Product Qualification: All products returned must be:

a. On the current price list

b. In good resale condition

c. In the original packaging

d. Purchased from IDC-USA within 3 years of the return

e. Stock items only; no special order items

f. Only those items which have been approved

VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.

RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.

FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.


Product's availability

State of California Proposition 65 Product Warning