Add products to your shopping cart
Free shipping

Image for Illustration purposes only. Actual product may vary

CR-2-XBC Stud Type Hex Head slot Sealed Crowned Needle Bearing Cam Follower

$44.97 Each


  • Typically ships in: 1 day
  • Weight: 1.4 lb
  • Free shipping on orders over $20
  • Contiguous U.S. States

Select Quantity

Additional Description

(D) Roller O.D. 2.000
(B) Roller Width 1.2500
(A) Stud Dia. .8750
(M) Stud Length 2
Basic Dynamic Rating (lbs) 10370
(S) Eff. Thread Min. 1
(T) Thread U.N.F. Class 2A 7/8-14
(A) Stud Dia. Tolerance +.001/-.000
(B) Roller Width Tolerance +.000/-.005
(D) Roller O.D. Tolerance +.000/-.001
Max. Static Capacity (lbs) 10700
(E) Min. Boss Dia. 1-13/64
SMITH Bearing Number CR-2-XBC
(P) Lube Fitting Size 3/16
(H) Oil Hole Dia. 5/32
(N) Oil Hole Location 1/2
Recom. Bore .8750
Recom. Bore Tolerance +.0005/-.0000
Recom. Torque (lbs-in) 2200
(R) Crown Radius (Inches) 24



Roller Width 1.2500
Roller Width Tolerance +.000/-.005
Eff. Thread Min. 1
Recom. Bore Tolerance +.0005/-.0000
Oil Hole Location 1/2
Stud Dia. .8750
Roller O.D. Tolerance +.000/-.001
Thread U.N.F. Class 2A 7/8-14
Recom. Bore .8750
Max. Static Capacity (lbs) 10700
Roller O.D. 2.000
Lube Fitting Size 3/16
Recom. Torque (lbs-in) 2200
Oil Hole Dia. 5/32
Basic Dynamic Rating (lbs) 10370
SMITH Bearing Number CR-2-XBC
Crown Radius (Inches) 24
Stud Dia. Tolerance +.001/-.000
Min. Boss Dia. 1-13/64
Stud Length 2

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.


ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.

ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:

a. Product brand name

b. Quantity

c. IDC-USA’s product identification number

d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.

AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.

Product Qualification: All products returned must be:

a. On the current price list

b. In good resale condition

c. In the original packaging

d. Purchased from IDC-USA within 3 years of the return

e. Stock items only; no special order items

f. Only those items which have been approved

VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.

RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.

FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.


Product's availability

State of California Proposition 65 Product Warning