Categories

Add products to your shopping cart

Subtotal

View cart

CR-1-7/8-BC Cam Follower-Crowned-Regular Stud Unsealed-Hex Drive

$27.00 Each

NEW

  • Free shipping on orders over $20
  • Shipping from: See locations
  • Typically ships in: 1 day

Select Quantity (minimum 2)

Additional Description

Specifications
Item #:CR-1 7/8-BC
Item Name:Series CR-BC & CR-XBC Crowned-Regular Stud, Hex-Drive Socket
Configuration:Crowned Outer Race
Drive Type:Hex-Drive Socket
Type:Unsealed
(D) Roller OD:1.875 Inch
(B) Roller Width:1.0000 Inch
(A) Stud Dia.:.7500 Inch
(M) Stud Length:1 3/4 Inch
(S) Eff. Thread Min.:7/8 Inch
(T) Thread UNF Class 2A:3/4–16
Hex Size:5/16 Inch
(N) Oil Hole Location:7/16
(H) Oil Hole Dia.:3/32 Inch
(P) Lube Fitting Size:3/16
Min Boss. Dia.:1 3/64
Recomm. Bore:.7500 Inch
Recomm. Torque:2000 lbs-in
Basic Dynamic Rating:7870 lbs
Max. Static Capacity:7950 lbs
(R) Crown Radius:20 Inch
McGill P/N:CF – 1 7/8
RBC P/N:S – 60
Torrington P/N:CR – 30

Specifications:

Roller Width 1.0000
Lube Fitting Size 3/16
Roller Width Tolerance +.000/-.005
Recom. Bore Tolerance +.0005/-.0000
Oil Hole Location 7/16
Stud Dia. .7500
Roller O.D. Tolerance +.000/-.001
Thread U.N.F. Class 2A 3/4-16
Recom. Bore .7500
Max. Static Capacity (lbs) 7950
Roller O.D. 1.875
Eff. Thread Min. 7/8
Recom. Torque (lbs-in) 2000
Oil Hole Dia. 3/32
Basic Dynamic Rating (lbs) 7870
SMITH Bearing Number CR-1-7/8-BC
Crown Radius (Inches) 20
Stud Dia. Tolerance +.001/-.000
Min. Boss Dia. 1-3/64
Stud Length 1-3/4

Return policy

Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.

File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf

ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.

ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:

a. Product brand name

b. Quantity

c. IDC-USA’s product identification number

d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.

AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.

Product Qualification: All products returned must be:

a. On the current price list

b. In good resale condition

c. In the original packaging

d. Purchased from IDC-USA within 3 years of the return

e. Stock items only; no special order items

f. Only those items which have been approved

VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.

RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.

FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.

 

This item is shipping from locations below:

Product's availability