Image for Illustration purposes only. Actual product may vary
MFCR-150 Smith-Trax Metric Idler Roller Flange Stud Type
MODEL MFCR-150
$459.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Orders over $500 qualify for a Free Gift
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Roller Width
76
Hex Size
12
Flange O.D.
173
Thread
M64 x 6
Eff. Thread Min.
82
Roller O.D.
150
Flange Width
18.3
Bearing Type
TRB
SMITH Bearing Number
MFCR-150
Dynamic Thrust Load Rating 500 hrs. 33 rpm.
63,000
Max. Static Capacity (newtons)
251,000
Stud Dia.
64
Stud Dia. Tolerance
+0.00/-0.02
Stud Length
140
Radial Basic Dynamic Rating 500 hrs. 33 rpm.
159,000
Shoulder Width Or End Plate Diameter
82.5
Specifications
| Item Name: | Series MFCR Flanged Stud Type, Smith-Trax |
|---|---|
| Bearing Type: | TRB - Tapered Roller bearing |
| (D) Roller OD: | 150 mm |
| (F) Flange OD: | 173 mm |
| (B) Roller Width: | 76 mm |
| (FB) Flange Width: | 18.3 mm |
| (A) Stud Diameter: | 64 mm |
| (M) Stud Length: | 140 mm |
| (S) Eff. Thread Min.: | 82 mm |
| (T) Thread: | M64 x 6 |
| (H) Hex Size: | 12 mm |
| (R) Shoulder Width or End Plate Diameter: | 82.5 mm |
| Radial Basic Dynamic Rating 500 hrs.33 rpm.: | 159000 Newtons |
| Dynamic Thrust Load Rating 500 hrs.33 rpm.: | 63000 Newtons |
| Max. Static Capacity: | 251000 Newtons |
| Osbron P/N: | HPJ–150 |
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.