- BRAND: SKF Bearing
- SKU: 315005
- CONDITION: NEW
- MODEL: RNU 203 ECP
SKF-Bearing RNU 203 ECP
- Free shipping on orders over $20
- Typically ships in: 1 day
- Weight: 0.1 lb
- Payment methods:
- Unit of Measure: EA
|Item #:||RNU 203 ECP|
|Item Name:||Single Row, without an Inner Ring Cylindrical Roller Bearings|
|Principal Dimension Fw:||0.8701 in|
|Principal Dimension D:||1.5748 in|
|Principal Dimension C:||0.4724 in|
|Basic Dynamic Load Ratings C:||3870 lbf|
|Basic Static Load Ratings C0:||3220 lbf|
|Speed Ratings - Reference:||19000 rpm|
|Speed Ratings - Limiting:||22000 rpm|
|Roller end / flange contact area|
SKF cylindrical roller bearings have two integral flanges on either the inner or outer ring to guide the rollers. The bearings have "open" flanges, i.e. the inward face of the flange is inclined by a defined angle. The flange design, together with the roller end design and surface finish, promote the formation of a lubricant film to reduce friction and frictional heat.
Logarithmic roller profile
The roller profile determines the stress distribution in the roller/raceway contact area. As a result, the rollers in SKF cylindrical roller bearings have a logarithmic profile to distribute loads evenly along the rollers. This prevents peak stresses at the roller ends to extend bearing service life. The logarithmic profile also reduces sensitivity to misalignment and shaft deflection.
The surface finish on the contact surfaces of the rollers and raceways maximizes the formation of a hydrodynamic lubricant film and optimizes the rolling motion of the rollers. The benefits derived from this, compared with traditional designs, include enhanced operational reliability.
The separable components of same-sized SKF cylindrical roller bearings are interchangeable. Any bearing ring with a roller and cage assembly can be assembled with any removable ring of the same bearing type and size having the same internal clearance class. This is particularly important when bearings and their components must be mounted independently of each other.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF