We never sell your data to third parties
Dodge 053047 P2B-SXV-014-NL two-bolt pillow block bearing with 7/8" bore, eccentric collar locking, intermediate duty, cast iron housing, 205 series ball bearing, pre-lubricated no-lube sealed design for maintenance-free operation. 7/8" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL P2B-SXV-014-NL
Contact supplier for technical support on: +1-864-284-5700
$56.94 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing Series
205 series ball bearing
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
7/8 in
Bore Diameter
7/8"
Bore length
1.2200 in, 30.988 mm
Configuration
Non-expansion (fixed) bearing
Duty
Intermediate duty
Duty Rating
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
No
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
4500 rpm
Relubrication
No
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
0.8750 in
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#132333
Brand
Dodge
Model
P2B-SXV-014-NL
#125286
Brand
Dodge
Model
P2B-SXVB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#125539
Brand
Dodge
Model
P2B-DL-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
| Brand | Gates Rubber |
| Model | 655L10 |
| Brand | Cooper Wiring |
| Model | 5131A |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/