We never sell your data to third parties
Dodge 058597 P2B-SCEZ-100-P E-Z Kleen two-bolt pillow block bearing with 1" bore (25.4mm), polymer housing, 65 degree set screw locking, QuadGuard seal, 205 series, corrosion resistant for washdown environments, non-expansion fixed. 1" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Dirty & Dusty Environment applications
MODEL P2B-SCEZ-100-P
Contact supplier for technical support on: +1-864-284-5700
$104.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Dirty & dusty environment
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.2000 in, 106.68 mm
Bolt to bolt min
3.9600 in, 100.584 mm
Bore
1 in
Bore Diameter
1 inch with 205 series bearing
Bore length
1.3400 in, 34.036 mm
Configuration
Non-expansion (fixed) bearing
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Polymer
Housing option
Polymer
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Mechanism
65 degree set screw (SCEZ)
Lubrication type
Grease
Max Speed
4500 rpm
Performance
Standard duty rating, 4500 RPM maximum speed
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Seal type
Single-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.0000 in
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bestorq |
| Model | 10/B136 |
| Brand | Dichtomatik |
| Model | 75023264 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/