We never sell your data to third parties
Dodge 125930 P2B-SCM-50M medium duty two-bolt pillow block bearing with 50mm bore. Cast iron housing with set screw locking, 211 series ball bearing, DualGuard seals. Non-expansion (fixed) configuration for shaft positioning applications. 50mm bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCM-50M
Contact supplier for technical support on: +1-864-284-5700
$218.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
211 series
Base to center height
2.5000 in, 63.5 mm
Bearing Series
211 series ball bearing
Bearing type
Ball, ball
Bolt centerline range
161.9 mm - 188.9 mm
Bolt Diameter
0.6250 in
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
50mm
Bore Diameter
50mm
Bore length
2.2200 in, 56.388 mm
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
50 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Mechanism
65 degree set screw
Lubrication type
Grease
Material
Steel
Max RPM
4000 rpm
Max Speed
2500 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Seal Protection
DualGuard single lip seals
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
63.5 mm
Shaft diameter
50.0000 mm
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#792197
Brand
Dodge
Model
128369
#123395
Brand
Dodge
Model
P2B-SCAH-115-FF
#123425
Brand
Dodge
Model
P2B-SCB-115-NL
#133455
Brand
Dodge
Model
P2B-SCM-50M
| Brand | Consolidated Bearings |
| Model | 6200-ZNR |
| Brand | NK North America Inc. |
| Model | K0693.01005 |
| Brand | NK North America Inc. |
| Model | K0298.550 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/