Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

BUNTING ECOP101432 5/8 x 7/8 x 2 SAE841 ECO (USDA H-1) Plain Bearing SAE841 ECO (USDA H-1) Plain Bearing

View additional description
  • Typically ships in: 1 day
  • Weight: 0.1 lb
  • Contact supplier for technical support on: 888-286-8464
  • MOQ: 14

$4.66 Each


Select Quantity

Unit of measure: each

Returnable: Yes

Payment methods:

Product's availability

State of California Proposition 65 Product Warning

Product's availability

State of California Proposition 65 Product Warning

Nov. 4, 2018

Bearings are very crucial in facilitating the smooth motion of a machine. If you pick the wrong quality, the chances are that the desired motion will not be achieved. Therefore, how do you pick the best non-rolling element bearing?

Read More


Additional Description

Bunting Bearings Llc Bunting&Reg; ECOP101432

UPC: 717905220500 | UNSPSC: 31171509 | GTIN:
Bearings > Plain & Sleeve Bearings > Plain Sleeve & Flanged Bearings

Bunting® Plain Sleeve Bearing, Series: ECO, 5/8 in Bore, 7/8 in OD, 2 in Width, 10 to 220 deg F, 2000 psi Maximum, 1200 sfpm Maximum Velocity, 50000 Maximum PV, Sintered Bronze Bearing, Powder Coated


  • Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
  • Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
  • Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
  • For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
  • Proper running clearance for bearings depends to a great extent on the particular application
  • Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
  • Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass
  • Properly stored and protected against dust, oil-impregnated bearings retain their oil supply


  • Maximum PV Rating: 50000
  • Maximum Velocity: 1200 sfpm
  • Bearing Material: Sintered Bronze
  • Temperature Rating: 10 to 220 deg F
  • Maximum Pressure: 2000 psi
  • Bore Diameter: 5/8 in
  • Outside Diameter: 7/8 in
  • Finish: Powder Coated
  • Width: 2 in
  • Series: ECO


ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | MIL-B5687 Military Specification | OSHA Standard 29 CFR 1910.120 | SAE 841 | USDA H-1 Approved


90 Days


I.D. 5/8 in
O.D. 7/8 in

SKU: 578747

Shaft sleeves/bunting

Really Good Price and Good Quality from what I can see. We use as shaft sleeves on electric pumps. Will order again!

Read more