Significant weather events across the U.S. are impacting our supplier's network. Some orders may be delayed for a few days.


Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

BUNTING ECOP121618 3/4 x 1 x 1 - 1/8 SAE841 ECO (USDA H-1) Plain SAE841 ECO (USDA H-1) Plain Bearing

View additional description
  • Typically ships in: 1 day
  • Weight: 0.1 lb
  • Contact supplier for technical support on: 888-286-8464
  • MOQ: 20

$3.21 Each


Select Quantity

Unit of measure: each

Returnable: Yes

Payment methods:

Product's availability

State of California Proposition 65 Product Warning

Product's availability

State of California Proposition 65 Product Warning

Nov. 4, 2018

The recommended methods for selecting the highest possible quality include the ABEC grading system, the material makeup, and application. Here is a closer look at the three methods.

Read More


Additional Description

Bunting Bearings Llc Bunting&Reg; ECOP121618

UPC: 717905220944 | UNSPSC: 31171509 | GTIN:
Bearings > Plain & Sleeve Bearings > Plain Sleeve & Flanged Bearings

Bunting® Plain Sleeve Bearing, Series: ECO, 3/4 in Bore, 1 in OD, 1-1/8 in Width, 10 to 220 deg F, 2000 psi Maximum, 1200 sfpm Maximum Velocity, 50000 Maximum PV, Sintered Bronze Bearing, Powder Coated


  • Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
  • Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
  • Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
  • For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
  • Proper running clearance for bearings depends to a great extent on the particular application
  • Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
  • Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass
  • Properly stored and protected against dust, oil-impregnated bearings retain their oil supply


  • Maximum PV Rating: 50000
  • Maximum Velocity: 1200 sfpm
  • Bearing Material: Sintered Bronze
  • Temperature Rating: 10 to 220 deg F
  • Maximum Pressure: 2000 psi
  • Bore Diameter: 3/4 in
  • Outside Diameter: 1 in
  • Finish: Powder Coated
  • Width: 1-1/8 in
  • Series: ECO


ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | MIL-B5687 Military Specification | OSHA Standard 29 CFR 1910.120 | SAE 841 | USDA H-1 Approved


90 Days


I.D. 3/4 in
O.D. 1 in

SKU: 578747

Shaft sleeves/bunting

Really Good Price and Good Quality from what I can see. We use as shaft sleeves on electric pumps. Will order again!

Read more