Categories

Subtotal

View cart
Add products to your shopping cart
#1131876

Image for Illustration purposes only. Actual product may vary

MRC 120KSFF SINGLE ROW BALL BRGS

$164.89 Each

NEW

  • Typically ships in: 1 day
  • Weight: 2.7 lb
  • Free shipping on orders over $20

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 2.71 lbs.
Product Name: 100-KS Extra Light Series Ball Bearing
Description: 100 mm ID x 150 mm OD x 24 mm Wide; Double Shielded; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.100 mmO.D. [Min]
O.D. [Max]O.D.150 mm
Width [Min]Width [Max]
Width24 mmEnclosureDouble Shielded
Rows of BallsSingleMaterialSteel
O.D. TypeStraightBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle
Guide TypeLubrication
Outer Ring Width24 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialMetal
Seal TypeNon-Contact SealsSeal Width
Dynamic Load Rating14300 lbfStatic Load Rating [Max]12100 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 1/2 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width24 mm
Internal DesignLimiting Speed
Limiting Speed - Grease4300 rpmLimiting Speed - Oil5000 rpm
Limiting Speed - Sealed2600 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantPolyurea Base
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]-22 °FTemperature Range [Max]250 °F
Use With  
Product Information
Features
  • Single-row radial conrad-type bearings
  • Made with bores ranging from 10 mm to 320 mm
  • No filling notches
  • Can carry significant radial loads and substantial thrust loads in either direction, even at very high speeds
  • Offered open, single, or double shields or seals, and snap rings in various combinations
  • Specifications:

    Cage Metal
    I.D. 3.937
    Locking None
    O.D. 5.906
    Bearing Type Radial
    Enclosure Double Shielded

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning