Categories

Add products to your shopping cart

#1132031

202SZZ3

Image for Illustration purposes only. Actual product may vary

MRC 202SZZ3 SINGLE ROW BALL BRGS

View additional description
  • Typically ships in: 1 day
  • Weight: 0.1 lb

$12.66 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Return policy

Item must be unused.

Item must be in it's original package.

Product's availability

State of California Proposition 65 Product Warning

Jan. 6, 2019

To diagnose false brinelling, check for wear marks in the axial direction on the rolling element pitch as opposed to marks that result from incorrect mounting.

Read More

 

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 0.11 lbs.
Product Name: Single Row Radial Bearing
Description: Single Row Radial Bearing, 15 mm ID x 35 mm OD x 11 mm Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
Specifications
Inch/Metric Metric Bore Bore Type Round Bore
I.D. 15 mm O.D. [Min]  
O.D. [Max]   O.D. 35 mm
Width [Min]   Width [Max]  
Width 11 mm Enclosure Double Sealed
Rows of Balls Single Material Steel
O.D. Type Straight Bearing Type Radial
Precision Standard Radial Internal Clearance Specification Normal Clearance
Ambient Temperature Range [Min]   Ambient Temperature Range [Max]  
Ball Material Steel Cage Type Metal
Capacity Standard Capacity Contact Angle
Guide Type   Lubrication  
Outer Ring Width 11 mm Precision Level Standard (ABEC 1)
Preload Level None Seal Material Rubber
Seal Type Contact Seals Seal Width  
Dynamic Load Rating 1750 lbf Static Load Rating [Max] 843 lbf
Ball Dia.   Bearing Design  
Bore B   Cage Material Steel
Collar No.   Collar O.D.  
Collar Width   Corner Radius [Min]  
Eccentric Collar Offset   Fillet Radius 0.64 mm
Flange O.D. [Max]   Flange O.D.  
Flange Width [Max]   Flange Width  
Flush Ground   Housing Shoulder Diameter [Min]  
Housing Shoulder Diameter [Max]   Housing Shoulder Diameter  
Industry Standard Part #   Inner Ring O.D.  
Inner Ring Offset   Inner Ring Width 11 mm
Internal Design   Limiting Speed  
Limiting Speed - Grease 13000 rpm Limiting Speed - Oil  
Limiting Speed - Sealed   Locking Device No Locking Device
Lube Hole Center   Lubricant Polyurea Base
Misalignment Range   No. in Set Single Bearing
No. of Balls   O.D. (B)  
Outer Ring   Outer Ring Inner Diameter  
Outer Ring Size   Peak Running Torque (mg-mm)  
Peak Starting Torque (mg-mm)   Pre Lubricant  
Preload Amount   Radial Internal Clearance Normal
Radial Load Rating [Max]   Radial Rigidity (lbf/µm)  
Reference Speed   Seal O.D.  
Seal Protection Width   Seating Washer  
Series   Set Screw Offset  
Set Screw Size   Shaft Shoulder Diameter [Min]  
Shaft Tolerance   Snap Ring No Snap Ring
Snap Ring O.D.   Snap Ring Offset  
Snap Ring Thickness   Special Features  
Stamping   Static Thrust Load Rating [Max]  
Temperature Range [Min] -22 °F Temperature Range [Max] 250 °F
Use With      
Product Information
General
Single-row radial deep groove bearing with no filling notches Can carry significant radial loads Can carry substantial thrust loads in either direction, even at very high speeds Supplied with a pressed steel cage Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm

Specifications:

Locking None
I.D. 0.591
Cage Metal
O.D. 1.378
Bearing Type Radial
Enclosure Double Sealed