Categories

Add products to your shopping cart

Subtotal

View cart
  • BRAND: MRC Bearing
  • SKU: 1132143
  • CONDITION: NEW
  • MODEL: 207SZZ

MRC 207SZZ SINGLE ROW BALL BRGS

$25.30 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 0.7 lb

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 0.661 lbs.
Product Name: 200-S Light Series Ball Bearing
Description: 35 mm ID x 72 mm OD x 17 mm Wide; Double Sealed; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.35 mmO.D. [Min]
O.D. [Max]O.D.72 mm
Width [Min]Width [Max]
Width17 mmEnclosureDouble Sealed
Rows of BallsSingleMaterialSteel
O.D. TypeStraightBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle
Guide TypeLubrication
Outer Ring Width17 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialRubber
Seal TypeContact SealsSeal Width
Dynamic Load Rating5730 lbfStatic Load Rating [Max]3440 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width17 mm
Internal DesignLimiting Speed
Limiting Speed - Grease9000 rpmLimiting Speed - Oil11000 rpm
Limiting Speed - Sealed6300 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantPolyurea Base
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]-22 °FTemperature Range [Max]250 °F
Use With  
Product Information
Applications
  • Used in applications with moderate to heavy radial loads, tow-directional thrust loads, or a combination of both
  • Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm
  • Specifications:

    Cage Metal
    I.D. 1.378
    Locking None
    O.D. 2.835
    Bearing Type Radial
    Enclosure Double Sealed

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning