Categories

Subtotal

View cart
Add products to your shopping cart
#1132331

Image for Illustration purposes only. Actual product may vary

MRC 216SZ SINGLE ROW BALL BRGS

$156.57 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 3.2 lb

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 3.159 lbs.
Product Name: 200-S Light Series Ball Bearing
Description: 80 mm ID x 140 mm OD x 26 mm Wide; Single Seal; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.80 mmO.D. [Min]
O.D. [Max]O.D.140 mm
Width [Min]Width [Max]
Width26 mmEnclosureSingle Seal
Rows of BallsSingleMaterialSteel
O.D. TypeStraightBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle
Guide TypeLubrication
Outer Ring Width26 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialRubber
Seal TypeContact SealsSeal Width
Dynamic Load Rating16400 lbfStatic Load Rating [Max]11900 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius2 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width26 mm
Internal DesignLimiting Speed
Limiting Speed - Grease4500 rpmLimiting Speed - Oil5300 rpm
Limiting Speed - Sealed3000 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantOil Preservative
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]Temperature Range [Max]
Use With  
Product Information
Applications
  • Used in applications with moderate to heavy radial loads, tow-directional thrust loads, or a combination of both
  • Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm
  • Specifications:

    Cage Metal
    I.D. 3.15
    Locking None
    O.D. 5.512
    Bearing Type Radial
    Enclosure Single Seal

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning