Categories

Subtotal

View cart
Add products to your shopping cart
#1132453

Image for Illustration purposes only

Actual product may vary

MRC 304SZZG SINGLE ROW BALL BRGS

$17.95 Each

NEW

  • Free shipping on orders over $20
  • Typically ships in: 1 day
  • Weight: 0.4 lb

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 0.357 lbs.
Product Name: 300-S Medium Series Ball Bearing
Description: 20 mm ID x 52 mm OD x 15 mm Wide; Double Sealed; With Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.20 mmO.D. [Min]
O.D. [Max]O.D.52 mm
Width [Min]Width [Max]
Width15 mmEnclosureDouble Sealed
Rows of BallsSingleMaterialSteel
O.D. TypeStraight w/ Snap RingBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle
Guide TypeLubrication
Outer Ring Width15 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialRubber
Seal TypeContact SealsSeal Width
Dynamic Load Rating3570 lbfStatic Load Rating [Max]1750 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width15 mm
Internal DesignLimiting Speed
Limiting Speed - Grease13000 rpmLimiting Speed - Oil16000 rpm
Limiting Speed - Sealed9500 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantPolyurea Base
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre Lubricant
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingWith Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]-22 °FTemperature Range [Max]250 °F
Use With  
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
  • Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Specifications:

    Cage Metal
    I.D. 0.787
    Locking None
    O.D. 2.047
    Bearing Type Radial
    Enclosure Double Sealed

    Return policy

    Item must be unused.

    Item must be in it's original package.

    Product's availability

    State of California Proposition 65 Product Warning