Categories

Add products to your shopping cart

Subtotal

View cart
  • BRAND: MRC Bearing
  • SKU: 1132488
  • CONDITION: NEW
  • MODEL: 306SG

MRC 306SG SINGLE ROW BALL BRGS

$30.52 Each

NEW

  • Free shipping on orders over $20
  • Shipping from: See locations
  • Typically ships in: 1 day

Select Quantity

Additional Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 0.816 lbs.
Product Name: 300-S Medium Series Ball Bearing
Description: 30 mm ID x 72 mm OD x 19 mm Wide; Open; With Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.30 mmO.D. [Min]
O.D. [Max]O.D.72 mm
Width [Min]Width [Max]
Width19 mmEnclosureOpen
Rows of BallsSingleMaterialSteel
O.D. TypeStraight w/ Snap RingBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityStandard CapacityContact Angle
Guide TypeLubrication
Outer Ring Width19 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialNone
Seal TypeUnsealedSeal Width
Dynamic Load Rating6320 lbfStatic Load Rating [Max]3600 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius1 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width19 mm
Internal DesignLimiting Speed
Limiting Speed - Grease9000 rpmLimiting Speed - Oil11000 rpm
Limiting Speed - Sealed6300 rpmLocking DeviceNo Locking Device
Lube Hole CenterLubricantOil Preservative
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre LubricantNone
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingWith Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]Temperature Range [Max]450 °F
Use With  
Product Information
Applications
  • Used with heavy radial loads, two-directional thrust loads or a combination of both
  • Features
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Specifications:

    Cage Metal
    I.D. 1.181
    Locking None
    O.D. 2.835
    Bearing Type Radial
    Enclosure Open

    Return policy

    Item must be unused.

    Item must be in it's original package.

    This item is shipping from locations below:

    Product's availability