Call (888)-671-2883
FREE SHIPPING
 on most items
Text message to Live Chat! (210) 878 - 2676

MRC 315M MAX TYPE BALL BRGS

BRAND: MRC Bearing | MODEL: 315M | CONDITION: NEW | SKU: 1132674
MRC 315M MAX TYPE BALL BRGS

Image for Illustration purposes only,
Actual product may vary
$246.64
FREE SHIPPING
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Ships in 1 day
Weight: 7.40 lbs UOM: EA
100% SAFE SHOPPING
PAYMENT METHOD
 
 

Additional Description

Documents

Description

Item Details
Manufacturer: MRC Bearing Service
Weight: 7.4 lbs.
Product Name: 300-M Medium Series Ball Bearing
Description: 75 mm ID x 160 mm OD x 37 mm Wide; Open; No Snap Ring; Single Row Radial Steel Bearing
Specifications
Inch/MetricMetric BoreBore TypeRound Bore
I.D.75 mmO.D. [Min]
O.D. [Max]O.D.160 mm
Width [Min]Width [Max]
Width37 mmEnclosureOpen
Rows of BallsSingleMaterialSteel
O.D. TypeStraightBearing TypeRadial
PrecisionStandardRadial Internal Clearance SpecificationNormal Clearance
Ambient Temperature Range [Min]Ambient Temperature Range [Max]
Ball MaterialSteelCage TypeMetal
CapacityMaximum CapacityContact Angle
Guide TypeLubrication
Outer Ring Width37 mmPrecision LevelStandard (ABEC 1)
Preload LevelNoneSeal MaterialNone
Seal TypeUnsealedSeal Width
Dynamic Load Rating28000 lbfStatic Load Rating [Max]26000 lbf
Ball Dia.Bearing Design
Bore BCage MaterialSteel
Collar No.Collar O.D.
Collar WidthCorner Radius [Min]
Eccentric Collar OffsetFillet Radius2 mm
Flange O.D. [Max]Flange O.D.
Flange Width [Max]Flange Width
Flush GroundHousing Shoulder Diameter [Min]
Housing Shoulder Diameter [Max]Housing Shoulder Diameter
Industry Standard Part #Inner Ring O.D.
Inner Ring OffsetInner Ring Width37 mm
Internal DesignLimiting Speed
Limiting Speed - Grease3500 rpmLimiting Speed - Oil4300 rpm
Limiting Speed - SealedLocking DeviceNo Locking Device
Lube Hole CenterLubricantOil Preservative
Misalignment RangeNo. in SetSingle Bearing
No. of BallsO.D. (B)
Outer RingOuter Ring Inner Diameter
Outer Ring SizePeak Running Torque (mg-mm)
Peak Starting Torque (mg-mm)Pre LubricantNone
Preload AmountRadial Internal ClearanceNormal
Radial Load Rating [Max]Radial Rigidity (lbf/µm)
Reference SpeedSeal O.D.
Seal Protection WidthSeating Washer
SeriesSet Screw Offset
Set Screw SizeShaft Shoulder Diameter [Min]
Shaft ToleranceSnap RingNo Snap Ring
Snap Ring O.D.Snap Ring Offset
Snap Ring ThicknessSpecial Features
StampingStatic Thrust Load Rating [Max]
Temperature Range [Min]Temperature Range [Max]450 °F
Use With  
Product Information
Caution
Not to be used where only thrust loads are present
Applications
  • Used with very heavy radial loads, or a combination of radial and thrust loads where the radial load is predominant
  • Features
  • Consists of single-row maximum capacity filling-notch bearings with bores ranging from 17 mm to 110 mm
  • Maximum radial load-carrying capacity
  • Ability to carry heavy combined radial and thrust loads
  • Designated as the notched type because it has a filling notch on one side of the inner and outer rings
  • Normally furnished with ABMA CO radial clearance
  • Type and material available is a two-piece, pressed steel, ball riding, stayrod cage